TOO MUCH TORQUE

car: 2001 integra LS

Does anyone know what size the pressure plate bolts are? I was told both 10mm and 14mm 12pt. Thanks

B_Swapped93

10mm 12pt 6 of them don't go using regular bolts for that tho OEM specific/ARP ones only.

wunfstgsr

Yea oly use OEM or better id recomend ARP bolts for the fly wheel and preasure plate, i replaced mines with those when i upgraded my clutch.

TOO MUCH TORQUE

Thanks guys! Im sticking with oem bolts. It's going to be a stock clutch disc replacement.

Caoboy

ARP's I believe cost the same as the OEM bolts or are cheaper. I can't remember. I may have just ordered them from ARP because it was easier, and it's an 'upgrade'.

And you can use the extra PP bolts for your distributor=show points

JRCivic1

The bolt size is actually 8mm x 1.25 pitch, but the bolt head size is 10mm 12-point.

B serious

iTrader: (1)

They are a M8x1.25. But have a 10mm drive with a 12 point high torque flanged head. Weird bolts for sure. Probably to force you not to use hardware store bolts, as a regular 12 or 13mm hex drive probably won't physically fit.

Buying from a dealer is a good idea.