Post your teg suspension set up and pics.
09-25-2003, 09:39 AM
#2
Member
Join Date: Jan 2002
Location: Dont get your Honda Stolen, NJ, USA
Posts: 2,397
Likes: 0
Received 0 Likes
on
0 Posts
Re: Post your teg suspension set up and pics. (93si)
here is what ive been looking into..remember to consider install costs
ive only been considering adjustable height becasue i hate uneven ride look..plus i wanna b ableto raise up and down for winter
Tein Basic about $635 shipped but can rust & no adjustment
tein SS about $850 but can rust
Koni Sp3& GC w/ custom rates..about 500 + $330=830 shipped great deal..
ive only been considering adjustable height becasue i hate uneven ride look..plus i wanna b ableto raise up and down for winter
Tein Basic about $635 shipped but can rust & no adjustment
tein SS about $850 but can rust
Koni Sp3& GC w/ custom rates..about 500 + $330=830 shipped great deal..
09-25-2003, 11:05 AM
#5
Honda-Tech Member
Join Date: Nov 2001
Location: Suck it Trebek
Posts: 3,138
Likes: 0
Received 0 Likes
on
0 Posts
Re: Post your teg suspension set up and pics. (93si)
koni yellows (neuspeed version) with 400f 350 r ground controls/ skunk2 rear sway/ neuspeed front upper rear upper lower tie bars and z-10 radius rods
09-25-2003, 01:29 PM
#7
"Haters Gonna Hate"
Re: (climaxpinoy)
Kyb AGX/Spoon springs/ 22mm rear sway==> The combo is good however it lowers a bit too much for my taste
<-- Waiting until next spring to install his revalved Tein HA's
Trending Topics
09-25-2003, 01:55 PM
#8
Honda-Tech Member
iTrader: (1)
Join Date: Dec 2001
Location: southside
Posts: 800
Likes: 0
Received 0 Likes
on
0 Posts
Re: (FrostyDC4)
dont have pics but i run kyb 4 way adjustables, honda sport 2-3/4 inch lowering springs, ingalls positrack adjustable camber kit (for camber and tire life of course) energy suspension bushings everywhere on the car(incl: upper shock tower bushing on front and rear shocks, sway bar bushing, lower and upper front and rear control arms and tie rod boots, motor mount inserts, lower torque mounts,tranny shifter stabilizer, steering rack and alot more), front upper strut tower bar.... next suspension upgrade is rear upper and lower tie bars and new front lower sway bar.........
09-25-2003, 04:49 PM
#9
New User
Join Date: Dec 2000
Location: st pete, fl, usa
Posts: 1,266
Likes: 0
Received 0 Likes
on
0 Posts
After 3 sets of suspension my favorite was the last set.
1. stock shocks with H+R sport springs, too low and bad ride
2. Tokico illumina shocks and skunk2 coilover sleeves, rides even worse than 1.
3. Koni yellows and eibach pro springs, best suspension setup i have ever driven on in a honda/acura.
So in my studies(lol) Koni yellow shocks with the Eibach pro springs was the best for all scenarios. Cornering was awesome and every other aspect was exactly what i was looking for!!!
1. stock shocks with H+R sport springs, too low and bad ride
2. Tokico illumina shocks and skunk2 coilover sleeves, rides even worse than 1.
3. Koni yellows and eibach pro springs, best suspension setup i have ever driven on in a honda/acura.
So in my studies(lol) Koni yellow shocks with the Eibach pro springs was the best for all scenarios. Cornering was awesome and every other aspect was exactly what i was looking for!!!
09-25-2003, 06:22 PM
#12
Member
Join Date: May 2002
Location: Fredneck, MD, USA
Posts: 1,708
Likes: 0
Received 0 Likes
on
0 Posts
Re: Post your teg suspension set up and pics. (Project H22DC4)
First, Koni Yellow and Eibach Pro-Kit, about $715 or so I paid a year ago I think. Also have Neuspeed front and rear upper tie bars and rear lower tie bar. Also have OEM JDM ITR 23mm rear sway bar.
Sold the Pro-Kit for $150 and put the stock springs back on.
Anticipated getting Ground Control coilover sleeves to mate up to the Koni's.
A picture
Sold the Pro-Kit for $150 and put the stock springs back on.
Anticipated getting Ground Control coilover sleeves to mate up to the Koni's.
A picture
09-25-2003, 07:19 PM
#13
Honda-Tech Member
Join Date: Jul 2002
Location: Scottsdale, AZ, usa
Posts: 3,105
Likes: 0
Received 0 Likes
on
0 Posts
Re: Post your teg suspension set up and pics. (mr_mbuna)
I don't have any pics yet, but im running kyb AGXs and skunk2 coil overs (440f and 330r i believe) as well as the 22mm rear sway bar
the suspension OWNZ
the suspension OWNZ
09-26-2003, 12:19 PM
#16
Thread Starter
Join Date: Apr 2003
Location: San Francisco
Posts: 345
Likes: 0
Received 0 Likes
on
0 Posts
how about this set up
Koni yellows with Eibach Pro Kit. Any body got this set up and pics to see how low it is. Also I keep getting rumors that some set ups give you a uneven drop? Any one know anything about this.
Koni yellows with Eibach Pro Kit. Any body got this set up and pics to see how low it is. Also I keep getting rumors that some set ups give you a uneven drop? Any one know anything about this.
09-26-2003, 12:29 PM
#17
Honda-Tech Member
Join Date: Nov 2001
Location: Suck it Trebek
Posts: 3,138
Likes: 0
Received 0 Likes
on
0 Posts
Re: (93si)
yeah the pro kit might make the back end look lower than the front end. thats what it did on my old del sol. i say spring for the ground controls. you can get them in any spring rate you want and are only 100 bux more than the pro kit
09-26-2003, 01:22 PM
#18
Honda-Tech Member
Join Date: Mar 2001
Location: Pennsylvania
Posts: 293
Likes: 0
Received 0 Likes
on
0 Posts
Re: Post your teg suspension set up and pics. (93si)
Zeal B6 Coilovers
Suspension Techniques Front Sway Bar (25mm)
Suspension Techniques Rear Sway Bar (19mm)
Comptech Rear Lower Tie Bar
Carbing Type II Front Upper Strut Bar (3-Point)
OEM GS-R Front Upper Strut Bar
Carbing Type I Rear Upper Strut Bar
OEM '94-'95 GS-R 5-Spoke Wheels (15")
Pirelli P700-Z 205/50-15 Tires
Suspension Techniques Front Sway Bar (25mm)
Suspension Techniques Rear Sway Bar (19mm)
Comptech Rear Lower Tie Bar
Carbing Type II Front Upper Strut Bar (3-Point)
OEM GS-R Front Upper Strut Bar
Carbing Type I Rear Upper Strut Bar
OEM '94-'95 GS-R 5-Spoke Wheels (15")
Pirelli P700-Z 205/50-15 Tires
09-26-2003, 02:20 PM
#19
New User
Join Date: Jul 2001
Location: city of angels, CA, USA
Posts: 6,380
Likes: 0
Received 0 Likes
on
0 Posts
Re: Post your teg suspension set up and pics. (93si)
ive been riding on progress springs and stock shocks for about 2 years now...but my shocks are blown. (after about 20k)
Next week I will be switching over to Tein SS,have ordered an itr rear swaybar w/ bsq kit, and ordering a mugen front strut brace shortly. I have a mugen rear strut brace and falken azenis currently.
Next week I will be switching over to Tein SS,have ordered an itr rear swaybar w/ bsq kit, and ordering a mugen front strut brace shortly. I have a mugen rear strut brace and falken azenis currently.
09-26-2003, 03:15 PM
#21
Member
Join Date: Nov 2001
Location: 615 music city, tn
Posts: 9,850
Likes: 0
Received 0 Likes
on
0 Posts
Re: (93si)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 93si »</TD></TR><TR><TD CLASS="quote">I didnt know that teins rust. Anyone have the H&R coilovers</TD></TR></TABLE>
here you go my friend.....i love these things....GREAT ride
here you go my friend.....i love these things....GREAT ride
09-26-2003, 04:28 PM
#25
Member
Join Date: Mar 2002
Location: Los Angeles, CA
Posts: 1,457
Likes: 0
Received 0 Likes
on
0 Posts
Re: (climaxpinoy)
jw wut kind of exhaust is that?
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by climaxpinoy »</TD></TR><TR><TD CLASS="quote">
i got the teins and they feel like stock but stiffer.
much better when used to have the skunks and stock shocks
.</TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by climaxpinoy »</TD></TR><TR><TD CLASS="quote">
i got the teins and they feel like stock but stiffer.
much better when used to have the skunks and stock shocks
.</TD></TR></TABLE>