PCV valve not connected
#1
Honda-Tech Member
Thread Starter
Join Date: Feb 2007
Location: usa
Posts: 445
Likes: 0
Received 0 Likes
on
0 Posts
PCV valve not connected
i just realized that my PCV valve is not connected to the IM. its just sitting there with nothing comming out of it.
What does that mean?
Is this bad?
Should i replace the valve and connect it to the IM?
thanks...
Modified by jorge59la at 7:42 PM 6/28/2007
What does that mean?
Is this bad?
Should i replace the valve and connect it to the IM?
thanks...
Modified by jorge59la at 7:42 PM 6/28/2007
#2
Cool Cool Island Breezes. BOY-EE
iTrader: (1)
Join Date: Sep 2006
Location: TRILLINOIS....WAY downtown, jerky.
Posts: 11,953
Likes: 0
Received 4 Likes
on
4 Posts
Re: PCV valve not connected (jorge59la)
The PCV valve routes unburned fumes from the crank case back to the IM so it can be burned and catalyzed. It also serves to relieve pressure inside your crank case.
Since its venting into the atmosphere, its relieving pressure.....but it's also polluting the air more than it should be. Reconnect it if you like to breath.
Since its venting into the atmosphere, its relieving pressure.....but it's also polluting the air more than it should be. Reconnect it if you like to breath.
#3
Junior Member
Join Date: May 2006
Location: No shirt, no shoes, no salvation, CA, USA
Posts: 413
Likes: 0
Received 0 Likes
on
0 Posts
Re: PCV valve not connected (B serious)
All the PCV valve does is vent unburned fuel vapors back to the combustion chamber, along with a little oil residue. The inside of your IM will look like a dirty chimney after time, though.
Thread
Thread Starter
Forum
Replies
Last Post