P1337 Crank Angle Sensor after engine swap
#1
Honda-Tech Member
Thread Starter
P1337 Crank Angle Sensor after engine swap
I just put a OBD2 B18B from a 99 Integra into a 98 Integra GSR shell. I pulled the engine from a 96 Integra LS and it was fine no codes.
Now it has this code P1337 which is the crank angle sensor. I'm puzzled. The only thing I can think of is that the GSR engine harness has the crank angle sensor going into the 4th plug coming from the ECU harness since there is a 4th plug on the ECU harness where as the LS ECU harness has 3 plugs.
Any help? I'm gonna check the helms.
Now it has this code P1337 which is the crank angle sensor. I'm puzzled. The only thing I can think of is that the GSR engine harness has the crank angle sensor going into the 4th plug coming from the ECU harness since there is a 4th plug on the ECU harness where as the LS ECU harness has 3 plugs.
Any help? I'm gonna check the helms.
Thread
Thread Starter
Forum
Replies
Last Post
MrAngry
Tech / Misc
10
09-13-2005 05:05 PM
MrAngry
Acura Integra
6
09-05-2005 05:03 PM