Noneed2hate's Integra Build
#28
Honda-Tech Member
Re: Noneed2hate's Integra Build
Love the sway bar, I recently installed mine makes a hell of a difference taking turns hot. Check out my post in suspension forum.
#29
Re: Noneed2hate's Integra Build
Got everything installed, I can see how much of a difference this will make, the OEM sway bar I had was TINY
Before and after pics:
Before and after pics:
Last edited by Noneed2hate; 07-28-2015 at 09:05 PM.
#31
Re: Noneed2hate's Integra Build
Haven't really tested it too much, since I want to give it all a chance to settle in more or less. But so far it feels way better, especially considering my OEM bar was about a 1/3 the size of the ASR bar I got.
#32
Re: Noneed2hate's Integra Build
just picked up this ViS Racing Carbon Fiber hood just needs little waxing/restoration and it'll be good as new -
Still unsure whether or not I want to even put it on.... I don't want that skunk look on my car
Still unsure whether or not I want to even put it on.... I don't want that skunk look on my car
#33
Re: Noneed2hate's Integra Build
some new pictures I took:
also got a MOMO steering wheel, hub and NRG quick release, but I think I'll hold off on installing them until I get seats, harness and a roll bar. I don't want to take a nosedive into a wheel with no airbag if I don't need to in a crash.
Putting aside any other upgrades for now, need to focus on some basic maintenance such as getting my timing belt replaced (already have the parts just a matter of doing it.) Also a new battery as well since I believe my current one is dying (had trouble starting this morning). Also need to narrow down some noises I've been hearing while driving and fix whatever issue is causing the sound. (unless of course I'm just being paranoid)
As for the carbon fiber hood I picked up, I finished sanding it and getting all the layered gunk/clearcoat etc off. Now I just need to hit it with some finer grit sand paper to "polish it up" and then clear coat it and repeat "polish" with 1000, 2000, and 3000 grit sand paper. I did try it out on the car before hand and honestly I don't like the look. So I may just finish it up and sell it.
also got a MOMO steering wheel, hub and NRG quick release, but I think I'll hold off on installing them until I get seats, harness and a roll bar. I don't want to take a nosedive into a wheel with no airbag if I don't need to in a crash.
Putting aside any other upgrades for now, need to focus on some basic maintenance such as getting my timing belt replaced (already have the parts just a matter of doing it.) Also a new battery as well since I believe my current one is dying (had trouble starting this morning). Also need to narrow down some noises I've been hearing while driving and fix whatever issue is causing the sound. (unless of course I'm just being paranoid)
As for the carbon fiber hood I picked up, I finished sanding it and getting all the layered gunk/clearcoat etc off. Now I just need to hit it with some finer grit sand paper to "polish it up" and then clear coat it and repeat "polish" with 1000, 2000, and 3000 grit sand paper. I did try it out on the car before hand and honestly I don't like the look. So I may just finish it up and sell it.
#35
Re: Noneed2hate's Integra Build
had a no start issue, ended up have a shorted ignition coil. Swapped that out, jumped the car (kill the battery a bit cranking it) and viola she fired right up.
also installed a new camseal with some RTV under the lip to help create a better seal. my old one was leaking pretty badly and making a mess of of my engine bay.
also finished sanding this bad boy. Unsure if I just want to wax it and maintain it. OR just clear coat so I don't have to worry about it as much.
also installed a new camseal with some RTV under the lip to help create a better seal. my old one was leaking pretty badly and making a mess of of my engine bay.
also finished sanding this bad boy. Unsure if I just want to wax it and maintain it. OR just clear coat so I don't have to worry about it as much.
#36
Re: Noneed2hate's Integra Build
got some new wheels and tires. 15x7 Rota Kyushas with Toyo Extensa HP's mounted. Sticks out a bit farther than I like and looks mexiflush, but at least I don't have huge wheels anymore.
#37
Re: Noneed2hate's Integra Build
It's been a hot minute since I've been on, added a quite a few things since my last posts and have some more stuff on the way/in the works.
I'll be updating the list of parts/mods etc on the 1st page for your viewing pleasure as well as near future plans.
I was also able to finally take my car to the track around the back end of February here's some pics
I'll be updating the list of parts/mods etc on the 1st page for your viewing pleasure as well as near future plans.
I was also able to finally take my car to the track around the back end of February here's some pics
Last edited by Noneed2hate; 07-28-2016 at 03:16 PM.
#39
Re: Noneed2hate's Integra Build
The pictures I just posted are showing up though. Here is a thread on another forum that has working links to the earlier pictures though I haven't posted any of my updates in it really. Noneed2hate's Build '01 LS integra - ClubIntegra.com - Acura Integra Forum
Also here is a video from my track day, I am going to apologize ahead of time for the terrible lighting.
#41
#42
Re: Noneed2hate's Integra Build
I'm in the process of getting a good seat/wheel/rollcage set up.
So far I've got the Corbeau Forza Sport seat, NRG hub/quick release, as well as a Momo Mod 8 wheel.
Next up on the chopping block of tasks is to install my roll bar/cage which should be done in a couple of weeks as well as the Takata Harness I got. I will also finally be installing the Energy Suspension Master Bushing set I got a while back and Hawk HPS pads that I've had sitting around as well.
So far I've got the Corbeau Forza Sport seat, NRG hub/quick release, as well as a Momo Mod 8 wheel.
Next up on the chopping block of tasks is to install my roll bar/cage which should be done in a couple of weeks as well as the Takata Harness I got. I will also finally be installing the Energy Suspension Master Bushing set I got a while back and Hawk HPS pads that I've had sitting around as well.
#43
Re: Noneed2hate's Integra Build
Half Cage has been put in as well as the bushings, HPS pads, and Takata Harness. Also got new ties rods, boots for said tie rods, steering rack boots, and a new clutch master cylinder.
It's starting to come along nicely. Now that suspension and safety are more or less out of the way, the next step will be towards giving this car some more power. Not quite sure what path I'll be taking in regards to that but we'll see.
It's starting to come along nicely. Now that suspension and safety are more or less out of the way, the next step will be towards giving this car some more power. Not quite sure what path I'll be taking in regards to that but we'll see.
Last edited by Noneed2hate; 09-14-2016 at 09:33 PM.
#45
Re: Noneed2hate's Integra Build
yeah I have no idea what it is, this website doesn't like my IMGUR links for some reason.. it's weird thought because the pictures show up for me.
are you able to see this? Noneed2hate Acura Integra Pics - Album on Imgur
are you able to see this? Noneed2hate Acura Integra Pics - Album on Imgur
#47
#48
Re: Noneed2hate's Integra Build
Some picture's from Saturday's track day! Was able to improve my time by about 3.824 seconds. Best time last I went was 2:26.858. Best time this time around was 2:23.034. Video from the last session of the day will be at the very bottom of this post. It is a little bit long at around 25 minutes.
Thread
Thread Starter
Forum
Replies
Last Post
1JDMDOMINICAN
Vehicles for sale
52
11-04-2004 06:01 AM
zangiefisgod
For Sale
1
02-17-2004 12:33 PM