Noneed2hate's Integra Build
#1
Noneed2hate's Integra Build
Hey all! I am just starting a thread to keep track of and to show you my current build/project. I'll keep the parts list in the first post updated with any additions etc.
It's a 2001 LS that's just had a manual swap done to it (originally an automatic). All the parts I've added are listed below if you'd like to take a gander.
156k Miles
Engine:
Stock - B18B1
DC Sports Short Ram Intake
DC Sports 4-2-1 Ceramic Header
GReddy EVO2 Exhaust
Gates Racing Blue Timing Belt
Gates Racing Water Pump
Koyo Tensioner
Blox Camseal
Optima Yellowtop Battery
Exterior:
SAE Motorsports license plate badge thingy for mad gainz because shop rep yo
ViS Racing Carbon Fiber Hood - I only put this on when I go to the track.
Drivetrain:
Stock - GSR 5 Spd Tranny
ACT Prolite Flywheel
EXEDY Oem Clutch and Pressure Plate
Energy Suspension Shifter Bushings
Innovative 75A mounts
Suspension:
Koni Yellow Struts
Eibach Sport Lowering Springs
F5 Racing Rear Lower Control arms.
DC Sports F&R Strut Bars
Buddy Club P1 F&R Camber kits
ASR Subframe Brace
ASR Adjustable Rear End Links
ASR Rear Sway Bar
Energy Suspension Bushings
AutoPower Roll Cage
Konig Dial-In 15x7 +35mm Wheels
Yokohama S Drive Tires
Interior:
BLOX 290mm Super Wide Blue Tint Mirror
Corbeau Forza Sport fixed back driver seat
TAKATA 4 Pt. Harness
MOMO Mod 8 Steering Wheel
NRG Short Hub
NRG 2.0 Quick Release
Mishimoto Shift ****
B&M Short throw shifter
Bling Bling Flash Flash:
Spoon Sports oil cap
Spoon Sports Sock thingies
Sparco Seat Belt Covers
(UPDATED 2016/09/14)
Next step for this car will be to get some more power, not too sure how I'll do that as of right now but will eventually figure that out.
Best laptime as of yet was 2:26 at Autoclub Speedway in Fontana on their Roval CCW course.
Attachment 520349
Let me know what you guys think! Comments and criticism are welcome!
It's a 2001 LS that's just had a manual swap done to it (originally an automatic). All the parts I've added are listed below if you'd like to take a gander.
156k Miles
Engine:
Stock - B18B1
DC Sports Short Ram Intake
DC Sports 4-2-1 Ceramic Header
GReddy EVO2 Exhaust
Gates Racing Blue Timing Belt
Gates Racing Water Pump
Koyo Tensioner
Blox Camseal
Optima Yellowtop Battery
Exterior:
SAE Motorsports license plate badge thingy for mad gainz because shop rep yo
ViS Racing Carbon Fiber Hood - I only put this on when I go to the track.
Drivetrain:
Stock - GSR 5 Spd Tranny
ACT Prolite Flywheel
EXEDY Oem Clutch and Pressure Plate
Energy Suspension Shifter Bushings
Innovative 75A mounts
Suspension:
Koni Yellow Struts
Eibach Sport Lowering Springs
F5 Racing Rear Lower Control arms.
DC Sports F&R Strut Bars
Buddy Club P1 F&R Camber kits
ASR Subframe Brace
ASR Adjustable Rear End Links
ASR Rear Sway Bar
Energy Suspension Bushings
AutoPower Roll Cage
Konig Dial-In 15x7 +35mm Wheels
Yokohama S Drive Tires
Interior:
BLOX 290mm Super Wide Blue Tint Mirror
Corbeau Forza Sport fixed back driver seat
TAKATA 4 Pt. Harness
MOMO Mod 8 Steering Wheel
NRG Short Hub
NRG 2.0 Quick Release
Mishimoto Shift ****
B&M Short throw shifter
Bling Bling Flash Flash:
Spoon Sports oil cap
Spoon Sports Sock thingies
Sparco Seat Belt Covers
(UPDATED 2016/09/14)
Next step for this car will be to get some more power, not too sure how I'll do that as of right now but will eventually figure that out.
Best laptime as of yet was 2:26 at Autoclub Speedway in Fontana on their Roval CCW course.
Attachment 520349
Let me know what you guys think! Comments and criticism are welcome!
Last edited by Noneed2hate; 09-14-2016 at 05:56 PM.
#3
Re: Noneed2hate's Integra Build
Not really, There is a tad bit on the undercarriage and some of the OEM suspension parts, places where you'd expect it, but otherwise it's very minimal
Last edited by Noneed2hate; 04-07-2015 at 07:58 AM.
#6
Honda-Tech Member
Join Date: Aug 2012
Location: San Diego, CA
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
Re: Noneed2hate's Integra Build
I tip my hat to you sir. You are truly a gentlemen.
Props for SAE shoutout
#7
Re: Noneed2hate's Integra Build
At the end of the day though I would be putting money into making sure everything is in working order/maintained before going that route, so I guess an investment of sorts to ensure the longevity of the car
They are definitely a good group of guys, really care about their finished product over making a quick buck. All the folks there have been pleasant to talk to and work with.
Trending Topics
#8
Honda-Tech Member
Join Date: Aug 2012
Location: San Diego, CA
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
Re: Noneed2hate's Integra Build
Definitely a good group. The car meets and bbq's they have at the shop usually have good turnouts and are a lot of fun. Been a while since I've been down there.
#9
Re: Noneed2hate's Integra Build
Nice, I haven't really been to any meets (save for a super small one a couple nights ago) yet since this car is more or less my introduction into this type of stuff. I'm definitely going to try to make my way to one in the near future though, would be neat.
#12
Re: Noneed2hate's Integra Build
Bought some small misc items for the teg, been needing the pedal covers for a while since I don't have anything on my clutch atm.... (so my feet won't slip anymore, especially when wet O_O ) and the end links because my stock ones broke
and some silly engine bay dress up stuff because why not. (didn't run me much)
and some silly engine bay dress up stuff because why not. (didn't run me much)
#13
Re: Noneed2hate's Integra Build
been a while since I posted any updates, I've since gotten some new wheels/tires (Axis Touring Cup 17x7 with kumho ecsta 215/45/7's mounted), and OEM mudflaps
I have a GReddy EvoII exhaust waiting to get put on since I need a decent (and CA legal) header and high flow cat :/
I have a GReddy EvoII exhaust waiting to get put on since I need a decent (and CA legal) header and high flow cat :/
#18
Re: Noneed2hate's Integra Build
Took some rad pictures this morning while the fog was still out and the morning sun was hitting the golden hills of SoCal. BEAUTIFUL hnnngggggg (also makes for a nice contrast to the voltage blue)
My favorite pic out of the 4
Also just got my DC Sports 4-2-1 Ceramic Header in the mail. Now it's just a matter of taking my car in to have my exhaust system put it (would do it myself, but some welding is required, and I have no welding machine/experience)
My favorite pic out of the 4
Also just got my DC Sports 4-2-1 Ceramic Header in the mail. Now it's just a matter of taking my car in to have my exhaust system put it (would do it myself, but some welding is required, and I have no welding machine/experience)
#20
Re: Noneed2hate's Integra Build
I have to admit, they were a bit difficult to stomache at first since they seemed so big, but they fill out the wheel wells perfectly and it's grown on me :D
#21
Honda-Tech Member
Join Date: Dec 2013
Location: Washington/Alaska
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
Re: Noneed2hate's Integra Build
Clean integra. I've always been a fan of stock integra wheels. Not a fan of anything bigger. Just doesn't look right to me. But if you like it then who cares.
#24
Re: Noneed2hate's Integra Build
Appreciate all the feedback guys!
As for the front end, I don't think I'll be changing it. I really don't mind the bug eye look over the JDM front end. Body wise I'd just like to keep everything as is.
That last pic is definitely my favorite too!
As for the front end, I don't think I'll be changing it. I really don't mind the bug eye look over the JDM front end. Body wise I'd just like to keep everything as is.
That last pic is definitely my favorite too!