need help!
#1
Honda-Tech Member
Thread Starter
Join Date: Jan 2005
Location: knowhere
Posts: 179
Likes: 0
Received 0 Likes
on
0 Posts
need help!
just bought a teg last tuesday.
i'm getting 2 codes out of the CEL.
8 TDC - top dead centre sensor
23 - knock sensor
not sure what i'm supposed to do with these or if my car is at risk.
any help would be appreciated.
i'm getting 2 codes out of the CEL.
8 TDC - top dead centre sensor
23 - knock sensor
not sure what i'm supposed to do with these or if my car is at risk.
any help would be appreciated.
#3
Re: need help! (halozero)
Well I never heard of the #8 code myself, I'd say check out your knock sensor first, maybe thats messing up the other one.... maybe someone else knows better... free bump, Good Luck
#4
Honda-Tech Member
Thread Starter
Join Date: Jan 2005
Location: knowhere
Posts: 179
Likes: 0
Received 0 Likes
on
0 Posts
Re: need help! (SlammedDAHatch)
knock sensor is nothing to worried about i'm told..
the other means my pistons are being fully extended... which is not good i'm told but it's nothing to worry about as long as i treat her nicely...
would just like some other opinions..
the other means my pistons are being fully extended... which is not good i'm told but it's nothing to worry about as long as i treat her nicely...
would just like some other opinions..
#7
Honda-Tech Member
Join Date: Mar 2003
Location: Cincinnati, OH
Posts: 2,428
Likes: 0
Received 0 Likes
on
0 Posts
Re: need help! (Honda Hick)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Honda Hick »</TD></TR><TR><TD CLASS="quote">RS's had knock sensors? I thought only VTEC motors had them. </TD></TR></TABLE>
ditto
ditto
Trending Topics
#10
Re: need help! (halozero)
On the knock sensor in my b18c was loose causing it to rattle and tell the ecu the motor was knocking (i guess). Tighten it up and see what happens, i think its a 27mm deep-wheel socket. Mabye your timing is off..causing the code 8...worth a try.
#12
Re: need help! (billyhoe)
replace dist. that should take care of the tdc code, as for knock sensor code. your car is an rs it shouldnt pull a KS code unless you are running a vtec ecu but if that were the case u would also get code 22 vtec pressure switch. check again two slow blinks and 3 fast blinks.........get some1 else to look at it also
Thread
Thread Starter
Forum
Replies
Last Post