MSD Modified distributor cap install help????
#1
Member
Thread Starter
Join Date: Apr 2002
Location: Long Beach, CA
Posts: 1,888
Likes: 0
Received 0 Likes
on
0 Posts
MSD Modified distributor cap install help????
My computer sucks, i can pull up a search for it however whenever i click on a link my whole system freezes...so thats why i'm asking this again.
I need to know how to install an MSD modified distributor cap....either let me know in a reply or direct me towards a link with instructions, any help would be much appreciated. thanks
I need to know how to install an MSD modified distributor cap....either let me know in a reply or direct me towards a link with instructions, any help would be much appreciated. thanks
#3
New User
Join Date: May 2001
Location: South San Diego, CA, usa
Posts: 1,263
Likes: 0
Received 0 Likes
on
0 Posts
Re: MSD Modified distributor cap install help???? (dingusjt)
uh...just screw it on.
if you mean all of the install. you will have to take out your interenal coil and wire the (+) and (-) to the new external coil. I had to "nick" the side of the cap to run the wires.
if you mean all of the install. you will have to take out your interenal coil and wire the (+) and (-) to the new external coil. I had to "nick" the side of the cap to run the wires.
#4
Trial User
Join Date: May 2000
Location: Atlanta, GA, USA
Posts: 479
Likes: 0
Received 0 Likes
on
0 Posts
Re: MSD Modified distributor cap install help???? (UltraPrince)
There are instructions at http://www.c-speedracing.com/
#5
Member
Thread Starter
Join Date: Apr 2002
Location: Long Beach, CA
Posts: 1,888
Likes: 0
Received 0 Likes
on
0 Posts
Re: MSD Modified distributor cap install help???? (VTECPWR)
ok thanks for the link...but i'm wondering whether it will be different instructions being that i am only using the MSD external coil and not the entire ignition box...from what i can tell there are only + and - terminals on the MSD Coil...these instructions describe 4 different wires and i'm sure that i only need 2.
I just need to know everything before i start ripping apart my distributor, thanks for any more help.
I just need to know everything before i start ripping apart my distributor, thanks for any more help.
#6
New User
Join Date: May 2001
Location: South San Diego, CA, usa
Posts: 1,263
Likes: 0
Received 0 Likes
on
0 Posts
Re: MSD Modified distributor cap install help???? (dingusjt)
ok thanks for the link...but i'm wondering whether it will be different instructions being that i am only using the MSD external coil and not the entire ignition box...from what i can tell there are only + and - terminals on the MSD Coil...these instructions describe 4 different wires and i'm sure that i only need 2.
I just need to know everything before i start ripping apart my distributor, thanks for any more help.
I just need to know everything before i start ripping apart my distributor, thanks for any more help.
#7
Re: MSD Modified distributor cap install help???? (UltraPrince)
The two wires are the + and - negative from your factory coil which is located inside your distributor. Remove the factory coil, feed the wires through the distributor grommet (this is a pain) and connect the two wires to the msd coil.
Adam
Adam
Trending Topics
#8
Honda-Tech Member
Re: MSD Modified distributor cap install help???? (dingusjt)
Thread
Thread Starter
Forum
Replies
Last Post
Truecure
Acura Integra
21
05-19-2005 10:09 AM
vaskater
Honda Civic / Del Sol (1992 - 2000)
3
09-15-2003 10:11 PM
Adi Radoncic
Acura Integra
2
02-14-2002 11:03 AM
acura, cap, distributor, guide, honda, install, installation, installing, integra, modified, msd, taking