miantence check light on
#2
Daisy... Daisy...
Re: miantence check light on (jaysterrr)
It is a timer circuit that has no real meaning. Reset it by pressing and holding the rectangular switch beneath the dash.
#4
Honda-Tech Member
Join Date: Jun 2004
Location: Miami, Fl, USA
Posts: 4,215
Likes: 0
Received 0 Likes
on
0 Posts
Re: miantence check light on (jaysterrr)
#7
Daisy... Daisy...
Re: miantence check light on (aaronISthrowed)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by aaronISthrowed »</TD></TR><TR><TD CLASS="quote">I think it turns on every 7,500 miles. Correct me if i'm wrong.</TD></TR></TABLE>
Allright. You're partially correct. From the 1998 Helm Factory Service Manual:
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 1998 Acura Integra Factory Service Manual »</TD></TR><TR><TD CLASS="quote">
Based on signals received from the vehicle speed sensor (VSS).the microcomputer in the maintenance reminder unit, which is located behind the dashboard lower cover, computes the distances traveled. When you turn the ignition switch ON, the reminder light in the gauge assembly will come on for two seconds (bulb check function). At 9,650 +-160
km (6,000 +- 100 miles) intervals, the reminder light will glow for two seconds and then blink ten seconds after you turn the ignition switch ON. This will repeat every rime you turn the ignition switch ON until the car reaches 12,070 +-160 km (7,500 +- 100 miles).
Beyond the 12,000 +- 160 km (7,500 +- 100 mile) interval, the light will continue to glow after the bulb check until you turn the ignition switch off or reset the unit.
To reset the unit, the car must be parked and the ignition switch must be ON. Press the reset button on the unit for more than three seconds, and the reminder light will go off.
</TD></TR></TABLE>
Allright. You're partially correct. From the 1998 Helm Factory Service Manual:
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 1998 Acura Integra Factory Service Manual »</TD></TR><TR><TD CLASS="quote">
Based on signals received from the vehicle speed sensor (VSS).the microcomputer in the maintenance reminder unit, which is located behind the dashboard lower cover, computes the distances traveled. When you turn the ignition switch ON, the reminder light in the gauge assembly will come on for two seconds (bulb check function). At 9,650 +-160
km (6,000 +- 100 miles) intervals, the reminder light will glow for two seconds and then blink ten seconds after you turn the ignition switch ON. This will repeat every rime you turn the ignition switch ON until the car reaches 12,070 +-160 km (7,500 +- 100 miles).
Beyond the 12,000 +- 160 km (7,500 +- 100 mile) interval, the light will continue to glow after the bulb check until you turn the ignition switch off or reset the unit.
To reset the unit, the car must be parked and the ignition switch must be ON. Press the reset button on the unit for more than three seconds, and the reminder light will go off.
</TD></TR></TABLE>
Trending Topics
#9
Daisy... Daisy...
Re: miantence check light on (aaronISthrowed)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by aaronISthrowed »</TD></TR><TR><TD CLASS="quote">Thanks for kinda correcting me lol </TD></TR></TABLE>
Thread
Thread Starter
Forum
Replies
Last Post
Ill Mitch
Acura Integra Type-R
8
04-13-2007 04:17 PM