Spawne32

iTrader: (3)

i cannot for the life of me find the information on the rest of the interior LED bulb types required for the HVAC panel, dome light and map lights, and ash tray lighting etc. Does anyone know the bulb # types from

https://www.superbrightleds.com/cgi-.../led_prods.htm

i cannot find anything small enough to replace the bulbs in the hazard light switch and defroster switch

13ino13

https://honda-tech.com/forums/showth...6quot;exterior
There you go buddy. This thread should tell you what sizes and how many.

On Superbrightleds.com be sure to get the 74-xHP3 Wedge Base LED bulbs on http://www.superbrightleds.com/cgi-b...ini-wedge.html for your climate control

So far i've replaced the license plate lights, trunk light, dome light, cluster lights, and my next project is to do the climate lights, tail lights, and front/rear turn signals. If you decide to get the tail lights, i'd recommend getting them from http://stores.shop.ebay.ca/warden-jp...34Q2ec0Q2em322 because i saw a thread on another forum where they compared these bulbs to a halogen on a Nissan Rogue and the 30 SMD red LED bulbs were brighter, and usually when it comes to LED bulbs compared to halogen bulbs in tail lights; halogen bulbs are brighter, but let me test them out first and i'll let you know. Feel free to ask any questions if anything of what i just posted didn't make sense.

13ino13

I just saw another thread on climate control lights and a guy said that it wasn't #74 bulbs... I'm PMed a guy who might know for sure so don't buy the climate control lights just yet..

Spawne32

iTrader: (3)

climate contro lights are neowedge 4, some of those bulb types dont fit because of the length of the LED's being longer, i know i havent been able to fit the neowedge 3 in the switches on the hvac, and i havent been able to fit the 74w bulbs in the ash tray and cig lighter area, too long with the LED.

supracrx

neowedge type B 4mm...definitely fits the climate control. i put those in mine just last month.

https://honda-tech.com/forums/showth...1942094&page=6

that thread shows the different ones i went thru...the last few posts.

Spawne32

iTrader: (3)

the two type a that u used for the hazard and defroster, where they the high intensity?

13ino13

Do you have any pictures of what your cluster and climate controls look like at night? I just ordered 4 white neowedge T4 and 4 white T3.

supracrx

^^^ not sure which ones you are talking about when u say t4 and t3....but here is the link to superbrightLED

http://www.superbrightleds.com/cgi-b...nstrument.html

on that page is the first set of bulbs. click buy now and it brings it up...i got 4 of the 4mm high power in white for climate control. When i say climate control i mean the buttons for the AC, the temperature slider, and the buttons to direct air to the driver...that unit has 4 bulbs. and those are the neo wedgex 4mm bulb.

the hazard, and rear defroster switch uses a even smaller bulb...i havent gotten around to change it yet but i will.

for the dash i got the wled x 5...matrix looking one in white.

don't got pics but with the high powered bulbs for cliamte contro...i got white and it came out blue. the dash i got natural white and its white...minimal hotspots too...worked out very good.

Spawne32

iTrader: (3)

pretty much got everything squared away with the exception of the rear defroster bulb

jasoncanseeoh

^is that yours?
That looks really nice and clean.
Was that **** stolen before? LOL.

Spawne32

iTrader: (3)

lol no, it was stripped to have alot of problems corrected as well as new paint, which i continually keep chipping and damaging.

jasoncanseeoh

Ahhhh, I see. Well, dude... if it's a DD, that's part of the process! Haha. Props for doing work.