itr suspension into gsr
#1
Junior Member
Thread Starter
Join Date: Jun 2005
Location: area 360, wa, usa
Posts: 132
Likes: 0
Received 0 Likes
on
0 Posts
itr suspension into gsr
i have itr suspension that i will be installing into a gsr. everything being front rear lca's, F&R sway bars, F&R springs and shocks. the question is, will i need a camber kit with this install? will i get any negative camber?
#2
Honda-Tech Member
Join Date: Mar 2007
Location: Anchorage, AK
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Re: itr suspension into gsr (jizzer671)
kinda depends on how much lower the car is. i dunno for sure, but i think 2 inches lower is bordering on needing a camber kit. any less and u can take it to a local tire/wheel shop and have them adjust it for $60... and it will b close enough to not have much negative effect on the tires...
#3
Honda-Tech Member
you will get negative camber but you wont need a camber kit because those springs wont lower you very much at all.
plus, one of the benefits of lowering a car is the negative camber.
plus, one of the benefits of lowering a car is the negative camber.
#5
Junior Member
Thread Starter
Join Date: Jun 2005
Location: area 360, wa, usa
Posts: 132
Likes: 0
Received 0 Likes
on
0 Posts
Re: itr suspension into gsr (doood)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by doood »</TD></TR><TR><TD CLASS="quote">depends on how low the drop is
you will need a reinforcement kit for the rear sway bar though and the front is the same size as your stock gsr</TD></TR></TABLE>
yes, i purchased and ASR reinforcement kit for the rear. but how many inches lower exactly will the itr suspension be than stock gsr suspension.
you will need a reinforcement kit for the rear sway bar though and the front is the same size as your stock gsr</TD></TR></TABLE>
yes, i purchased and ASR reinforcement kit for the rear. but how many inches lower exactly will the itr suspension be than stock gsr suspension.
#6
Darth ModerVader
Re: itr suspension into gsr (jizzer671)
No, you won't need a camber kit. It's a factory suspension setup that is only 15mm lower than other Integra models. Just have an alignment performed after you're finished.
#7
Junior Member
Thread Starter
Join Date: Jun 2005
Location: area 360, wa, usa
Posts: 132
Likes: 0
Received 0 Likes
on
0 Posts
Re: itr suspension into gsr (Padawan)
alright so im done installing the front and im onto the rear, i notice for the rear i didnt recieve the metal clamps for the bushings, just the bushings and swaybar which are 23mm. I called tha acura dealer and all they have are 22mm clamps. would it be wrong to use a 22mm clamp? will this cause any malfunctions in the swaybars mechanics?
Thread
Thread Starter
Forum
Replies
Last Post
Tuesdaynightfever
Honda Civic / Del Sol (1992 - 2000)
18
05-20-2005 05:42 AM