da9pwnsu

Not sure if this is how everyone else installed it, but this is what i did

Difficulty level: noob

Stuff u need:
1) An aftermarket CD player

What to do:
1) Go to the Pick-N-Pull, and ask if they have 92 or so Ford Taurus. Grab the cupholders (see pic), make sure when you find them to get the two hinges that hang down from the cupholder to hold ur drink in place... the cupholders also come with a nice little tray for putting money and coins and stuff in

(if you live in the Bay Area, the Commerical St. Pick-N-Pull has alot of these right now, and while ur there make sure to get the chicken tacos from the food vendor, they are hella good)

2) After looking at that ugly Taurus for so long go back out to your sweet sweet DA. Now ure going to want to trim the back of the cupholders to fit into your console, so grab whatever u can and hack away at the rear until it fits

3) Now, remove your Metra kit, slide the cupholder onto the bottom about halfway, then slide in your deck from the top, push them both in until they sit flush, viola you're done. To make it look cleaner, you can also trim certain parts off the cupholders, or screw them in, but you don't need to worry, as everything will stay in place no matter how you drive

The cupholders will hold small drinks such as bottled water, coke cans, energy drinks, and the best drink ever However, to fit something large like a King size drink, you are going to need a little bit of modification...good luck

SIRIUS EJ8

w00t w00t on a great write up.

ragejed

<3 bawls <3

hybridej7

finally a way to shut my g/f up about not having cupholders. i told her before, i do have cupholders..... then i gave her my soda..... see, told you i had a cupholder..... she didnt think that was funny..... def going to the junk yard for this......

1999CivicSi

i wouldnt put anything ford in my car..eww

p.s. im drunk so dont hate on my comment

DC5StylZ

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hybridej7 &raquo;</TD></TR><TR><TD CLASS="quote">finally a way to shut my g/f up about not having cupholders. i told her before, i do have cupholders..... then i gave her my soda..... see, told you i had a cupholder..... she didnt think that was funny..... def going to the junk yard for this......</TD></TR></TABLE>

good ****

rkrone

wow! i am in the process of doing the same exact thing!!! i just need to trim it to fit in place a little better, best $5 ever!
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hybridej7 &raquo;</TD></TR><TR><TD CLASS="quote">finally a way to shut my g/f up about not having cupholders. i told her before, i do have cupholders..... then i gave her my soda..... see, told you i had a cupholder..... she didnt think that was funny..... def going to the junk yard for this......</TD></TR></TABLE>
...the reason in the first place as well, lol

Danziver

good write up

Jose-aka-Pedro

Nice

(not jacing your thread)
If you can find these they work too

Most peoples are broken, soo the fix is to dremel the hole out and you got cupholders
Found this at the JunkYard


<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hybridej7 &raquo;</TD></TR><TR><TD CLASS="quote">finally a way to shut my g/f up about not having cupholders. i told her before, i do have cupholders..... then i gave her my soda..... see, told you i had a cupholder..... she didnt think that was funny..... def going to the junk yard for this......</TD></TR></TABLE>

It's*BOLO!!

very good job man, I would have loved to fab something like this up when I had a CRX still

Noemotion_91DA

Sweet cupholders

j_DC2_m

WHAT THEY DONT KNO WONT HURT DONT TELL THEM ITS FROM A FORD HAHA JUS TELL THEM THAT SOMEONE WRKS AT ACURA AND MAKE ONE FOR YOU HAHA

DA-9mordef

thats fkin cool..ima gettin one..

tttravis

i may have to go look for one of those

da9pwnsu

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Jose-aka-Pedro &raquo;</TD></TR><TR><TD CLASS="quote">Nice

(not jacing your thread)
If you can find these they work too

Most peoples are broken, soo the fix is to dremel the hole out and you got cupholders
Found this at the JunkYard


</TD></TR></TABLE>

yeah i have that too but my cupholder part is broken

edit: this is a VERY rare part, do your best to hold onto it


Modified by oldschoolDA9 at 6:14 PM 7/26/2006

jdm_bones

iTrader: (5)

Good ****, might try this on my EG..

mike9571

Is everything tight, or is it just sitting there? Also when you have cups in it does it get in the way of shifting?

da9pwnsu

it sits perfectly tight, they kinda lock in place. if you install it as i did, it will also not interfere with shifting

mike9571

Good deal, just so happens my g-ma has a wrecked taurus

91maroonGoon

at first i was like WTF!?! what is he talkin about. then i was like "awwwwwwwwww!" nice little mod. anyone else do anything custom like that to there whips?

91teggyman

dats nice...but i cant do dat cause i have gauges where ur phone and air freshener is ......good mod though

solid gsr

awesome idea!! excellent move for a clean mod

kinoukiita

great stuff really need to do this cause i had to drive from the mall with a starbucks cup in hand

CleanLikeJdm

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ragejed &raquo;</TD></TR><TR><TD CLASS="quote">&lt;3 bawls &lt;3</TD></TR></TABLE>

Oh snap!!1 I didn't know other people drank that.

SFrymyah

thats awesome i've got to try this on my DC. everyone on the planet knows how worthless the cupholders are in that