How to replace cam seal? b20b?
#1
New User
Thread Starter
Join Date: Dec 2000
Location: USA
Posts: 1,005
Likes: 0
Received 0 Likes
on
0 Posts
How to replace cam seal? b20b?
I'm about to do a tune up on my uncles car.., how hard is it to replace cam seals, i never done it.. any links or walk through sites? Thanks
#2
Member
Join Date: Apr 2002
Location: Formerly pdcdragon, CA, US
Posts: 3,416
Likes: 0
Received 0 Likes
on
0 Posts
Re: How to replace cam seal? b20b? (Integra_Boi)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Integra_Boi »</TD></TR><TR><TD CLASS="quote">I'm about to do a tune up on my uncles car.., how hard is it to replace cam seals, i never done it.. any links or walk through sites? Thanks</TD></TR></TABLE>
Go to the link in my sig... it goes to my site.. then go to the DIY section... the cam seal install was done on a b18b which should be very similar. One difference that you may incur in the case that the b20s are like the b18c's then you will have to remove the cam holder plate that goes across the top of the cam holders. You'll see what i'm talkin about if u have it when u open up ur valve cover.
ON my site are many pictures of the entire procedure and step by step instructions so you can judge for yourself if it is a task that you are confident of performing.
Hope my site & effort help you out. I'd be happy to answer any other questions u may have if i kno the answers...
-Eric
Go to the link in my sig... it goes to my site.. then go to the DIY section... the cam seal install was done on a b18b which should be very similar. One difference that you may incur in the case that the b20s are like the b18c's then you will have to remove the cam holder plate that goes across the top of the cam holders. You'll see what i'm talkin about if u have it when u open up ur valve cover.
ON my site are many pictures of the entire procedure and step by step instructions so you can judge for yourself if it is a task that you are confident of performing.
Hope my site & effort help you out. I'd be happy to answer any other questions u may have if i kno the answers...
-Eric
#3
New User
Thread Starter
Join Date: Dec 2000
Location: USA
Posts: 1,005
Likes: 0
Received 0 Likes
on
0 Posts
Re: How to replace cam seal? b20b? (pdcdragon)
Thankyou!! i took a look at the pics and the ones i'm trying to do are the ones on the right i believe.. its just a O ring looking cam seal....
Modified by Integra_Boi at 2:51 AM 6/17/2003
Modified by Integra_Boi at 2:51 AM 6/17/2003
#4
Member
Join Date: Apr 2002
Location: Formerly pdcdragon, CA, US
Posts: 3,416
Likes: 0
Received 0 Likes
on
0 Posts
Re: How to replace cam seal? b20b? (Integra_Boi)
ahh ic ur tryin to change the cam seals on the other side... i see... talk to b2finity on this board.. he replaced those on his ride not too long ago...
#6
Member
Join Date: Apr 2002
Location: Formerly pdcdragon, CA, US
Posts: 3,416
Likes: 0
Received 0 Likes
on
0 Posts
Re: How to replace cam seal? b20b? (ebelp)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ebelp »</TD></TR><TR><TD CLASS="quote">Sweet writeup, pdc! Where do you get Hondabond from? Dealer?</TD></TR></TABLE>
Thanks john, yea i got the hondabond from the dealer. But u can use an equivalent high temp sealant from the autoparts store i believe... but i jus use the oem ish.<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ebelp »</TD></TR><TR><TD CLASS="quote">Sweet writeup, pdc! Where do you get Hondabond from? Dealer?</TD></TR></TABLE>
Thanks john, yea i got the hondabond from the dealer. But u can use an equivalent high temp sealant from the autoparts store i believe... but i jus use the oem ish.<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ebelp »</TD></TR><TR><TD CLASS="quote">Sweet writeup, pdc! Where do you get Hondabond from? Dealer?</TD></TR></TABLE>
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
IVI
Honda Civic / Del Sol (1992 - 2000)
5
05-02-2005 02:26 PM