How to remove injector
#1
Honda-Tech Member
Thread Starter
Join Date: Jul 2006
Location: Oklahoma/Texas
Posts: 1,312
Likes: 0
Received 0 Likes
on
0 Posts
How to remove injector
Yes I know its an easy thing but I dont have time right now to tinker with the stupid search...
What I really want to do is swap injectors from one cylinder to another to see if the misfire I am having changes cylinders.
Dont I have to relieve fuel pressure?
Do I just loosen that bolt on the fpr? Anything else involved?
What I really want to do is swap injectors from one cylinder to another to see if the misfire I am having changes cylinders.
Dont I have to relieve fuel pressure?
Do I just loosen that bolt on the fpr? Anything else involved?
#3
Honda-Tech Member
Join Date: Jul 2004
Location: GRANADA HILLS, CA
Posts: 240
Likes: 0
Received 0 Likes
on
0 Posts
Re: How to remove injector
I would disconnect the battery as well...just my opinion. My wife started my car once while the injectors were off for cleaning.
#5
Junior Member
Join Date: Mar 2008
Location: niles, mi, usa
Posts: 973
Likes: 0
Received 0 Likes
on
0 Posts
Re: How to remove injector
You have to unbolt the fuel rail im not sure if there are two or three bolts. BE CAREFUL when pulling the injectors out. The o-rings are very delicate if they are old. Also there is little filters inside the injectors make sure those are in right when you put them back in.
Trending Topics
#8
I am SO fancy!
Join Date: May 2014
Location: Houston
Posts: 147
Likes: 0
Received 0 Likes
on
0 Posts
Re: How to remove injector
This is all you get, since you asked so nicely.
Go to the parts store and get o-ring kits for each one. You'll trash 'em being that old.
Book says to crack the fuel filter bolts to relieve the pressure. I remove the fuel pump fuse and crank the engine a few times. No big deal.
Go to the parts store and get o-ring kits for each one. You'll trash 'em being that old.
Book says to crack the fuel filter bolts to relieve the pressure. I remove the fuel pump fuse and crank the engine a few times. No big deal.
#9
B*a*n*n*e*d
#10
B*a*n*n*e*d
Re: How to remove injector
This is all you get, since you asked so nicely.
Go to the parts store and get o-ring kits for each one. You'll trash 'em being that old.
Book says to crack the fuel filter bolts to relieve the pressure. I remove the fuel pump fuse and crank the engine a few times. No big deal.
Go to the parts store and get o-ring kits for each one. You'll trash 'em being that old.
Book says to crack the fuel filter bolts to relieve the pressure. I remove the fuel pump fuse and crank the engine a few times. No big deal.
#11
Honda-Tech Member
Thread
Thread Starter
Forum
Replies
Last Post
e jay one
Honda Civic / Del Sol (1992 - 2000)
2
03-26-2007 03:58 PM
B16Jacques
Honda CRX / EF Civic (1988 - 1991)
5
06-15-2005 08:25 PM