Will this be reliable?
#1
Member
Thread Starter
Join Date: May 2001
Location: The Pacific, Northwest
Posts: 3,094
Likes: 0
Received 0 Likes
on
0 Posts
Will this be reliable?
LS block
b18c Head
95 gsr ecu
Gsr Cams
SRP pistons for gsr, 11.0:1 cr
eagle rods
ITR intake mainfold (converted to fit GSR head)
gsr oil pump
and of course all the bolt ons.
Would this be reliable enough to run year around as my daily driver? Would the cr still be 11.0:1 since I will be using a gsr head, if not, about what would the compression be? What kind of power and torque would this make? Would I beable to use my curent TB and injectors? Would the stock gsr ecu work out alright?
Thanks for any info.
b18c Head
95 gsr ecu
Gsr Cams
SRP pistons for gsr, 11.0:1 cr
eagle rods
ITR intake mainfold (converted to fit GSR head)
gsr oil pump
and of course all the bolt ons.
Would this be reliable enough to run year around as my daily driver? Would the cr still be 11.0:1 since I will be using a gsr head, if not, about what would the compression be? What kind of power and torque would this make? Would I beable to use my curent TB and injectors? Would the stock gsr ecu work out alright?
Thanks for any info.
#2
Honda-Tech Member
Join Date: Feb 2000
Location: NC
Posts: 2,022
Likes: 0
Received 0 Likes
on
0 Posts
Re: Will this be reliable? (BLK94RS)
I take it you are using the LS crank and Eagle rods for the LS block? If so, I would think the compression would be slightly more due to the increased stroke and swept area with the LS bottom end.
Reliable, should be fine...
Jason
Reliable, should be fine...
Jason
#3
Re: Will this be reliable? (FSTASNTZ)
u will need a chipped p28 ECU , unless u gonna put a KNOCK SENSOR in ur block. that setup is pretty reliable.... just dont push the engine real hard everyday and your engine will be fine. good luck!
#4
Member
Thread Starter
Join Date: May 2001
Location: The Pacific, Northwest
Posts: 3,094
Likes: 0
Received 0 Likes
on
0 Posts
Re: Will this be reliable? (*****rAcEr)
How hard is it to put a knock sensor in my block? Yes, if I do it, I will be using the ls crank with eagle rods. Also I will use the z10 block gridle.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
tnsxsear1
All Motor / Naturally Aspirated
3
02-08-2004 03:33 PM