Ricextacy

my DA seats are worn out and want to swap in DC or ITR seats.

ive searched but didnt find anything helpful.

can anybody help with an instruction manual w/pictures?

rail swap, attaching auto seat belts would be great...

Ricextacy

if anybody else needs help, BUMP!! if ya feel me

JDM92da6

umm they bolt right in

Ricextacy

no they dont. u gotta swap railings

Ricextacy

bump!!

DVSBIZZYB

Here is the write up for Del Sol seats into a DA. The procedure is the same.

http://battlecat.8m.com/DelSols_install.htm

super jdm yo

that's about it for the fronts and i don't you'll be able to get the rear seats in though.

Ricextacy

thx, but ive seen the del sol seats. just wanted to find one for tegs..

rear seats gotta match up with the front. ive seen ITR seats on EKs but cant fit a DA wtf??

DA_9

Sorry dude take it from a former GSR REAR SEATS IN A DA owner....not gonna work without custom work. GSR leather fronts with DA leather rears= expletiveIN SEXY --btw i think he meant that the DEL SOL seats bolt up the same as the GSR seats, so the write up should be the same for both understand? And if i remember correctly the plug for the seat belts...you may have to cut the wires and solder them together cuz the plugs are not the same. but it should work i kno a friend who did somethin similar to that. My leathers where in the car.

Ricextacy

TEG: dude... disaster
Ricextacy: wsup??
TEG: its going to take some serious work to get the rail to fit
Ricextacy: o forreals..
TEG: yeah i put a pic on
TEG: and the issue is that i dont know if changing the rail will even lower it
TEG: so i dont want to jack it all up
TEG: and then find out it wont work
Ricextacy: forreals huh
TEG: yeah
Ricextacy: wow
Ricextacy: might think about reupholstering em
TEG: yeah
TEG: thats the other thing if i take the rails and put them on my seats the seats i have will be useless even if i reupholster them
Ricextacy: o yeah
Ricextacy: once u take em off there done?
TEG: ... well they woulnt have a rail any more
Ricextacy: hmm
Ricextacy: are u tryin the one with the del sol seat right up?
TEG: yeah i looked at it
TEG: but see... back where the hinge for the back is different
TEG: i dunno

Ricextacy

bump cuz didnt get any great feedback

Rajin

You'd be better off looking for some Special Edition DA Leathers.

They arent to hard to find and lack the work of swapping rails and drilling new points to mount the new seats.

I suggest that over the DC seats.

Ricextacy

hard to find clean condition seats now a days..

i already tried but the go for way to much on ebay and tore up condition at the yard..

also thought about reupholstering em or go DC/ITR

anybody done this yet? i kno its been talked about but never been resolved.. if it has and u have the answer please send me the link.

thanks

kilo_da9

bump cause i want to do this too! i c u posted on g2ic too ive been looking all over there and here and cant find sh** let me know if u find nething.

PhantoM.DA

i wanna do this to my DA too... bump

DAmnquickDA

this wont help... but just do JDM recaros. they are straight sexy and recaro makes rails/brackets/sliders for DA's.

JDMguy88

just have your existing seats re-upholstered in leather

gsilnc

BUMP
im able to get dc leather seats for $25
dont want to re-upholster or get expensive seats DUH

da_90_teg07

dude just swich railings or just drill new holes.. [freak] it i did it to some gsr seats in my da... but there none leater

BETO_20DA

Im currently getting my seats done in my da. I took apart the seats to clean the seatbelts and rails. I discovered that the rail come off completely. But I always wondered how you could transfer seat( GSR into DA). Guess you would have to get one of each and compare. It tough because of the seatbelt set up, I know. Well good luck man.

0LdsKooL

Just look for some DA leather seats.. I know its hard to find but it makes it easier for you and you don;t have to do any rail swap

Gtimportfanatic

dude i've been trying to do the same.. my boy is willing to trade me all the leathers from his 00 GSR for my racing buckets... i wanna do it only because of the back seats cuz my DA seats are [freak]ed.. i just wanna know ifd this is gonna work or no.. someone saaid that there will be a gap on both sides because the DA is wider than the DC

tttturok2001

looking for the same answer as everone else. a nice write up would be a ppreciated from anyone thats done it or is going to do it. if i do it soon, i make a write up!

BETO_20DA

I decided to just get my seats redone, I had the same problem. I decided to go with soft vinyl, grey. Im picking up my driver seat tommorow!! Im excited, but cant put it in till my dash is taken out and painted. I had trouble today trying to get it out the light switch is in the way. Has anyone pulled out a dash of a DA. I will post my pics for your critique. IM fairly new to this site but I freaken love it!!!!

dc2teg06

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BETO_20DA &raquo;</TD></TR><TR><TD CLASS="quote"> It tough because of the seatbelt set up, I know. Well good luck man. </TD></TR></TABLE>

The auto 2nd gen seatbelts bolt up fine to a 3rd gen bracket. Or at least they did with my buddies 92 integra. The problem is fitting the third gen rails into a Gen 2 Chassis. Nothing on the 3rd gen rail lines up with the 2nd gen chassis. So unless you modify the rails it doesn't want to bolt in because nothing lines up. For his seats i think he's going try to somehow custom fit the 2nd gen gen rails to the GSR leathers.

So your options are:
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JDMguy88 &raquo;</TD></TR><TR><TD CLASS="quote">just have your existing seats re-upholstered in leather </TD></TR></TABLE>

or

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by da_90_teg07 &raquo;</TD></TR><TR><TD CLASS="quote">dude just swich railings or just drill new holes.. </TD></TR></TABLE>

You could switch the rails, but I don't think the gen 2 rails directly bolt to the 3rd gen seats because of the seat belt setup. With some modifying that could be an option. Or you could drill new holes into the body itself so it lines up with the brackets on the seats. Lastly you could drill out the existing holes in the 3rd gen rails, and shim them out enough until the holes line up. You'll probably just need to use a bigger washer for the bolts..

All i know is that it's an annoying swap! The rear seats definatley don't fit without leaving gaps. So 2nd gen leathers in the rear is a must for a clean swap IMO.