hastingsr

I need to remove my cv axle by 2 hours so I can get my alternator off. When I go to remove the axle nut on the hub I can get the hub to not move. I have a big *** breaker bar and when I try to break the nut free it acts like it wants to stay but the it slowly moves and I get no where. HELP PLEASE!!

hastingsr

okay i got the cv nut off, now the rotor is frozen, any sugestions?

Jimmy

iTrader: (5)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hastingsr &raquo;</TD></TR><TR><TD CLASS="quote">okay i got the cv nut off, now the rotor is frozen, any sugestions?</TD></TR></TABLE>

What do you mean the rotor is frozen?

There are two hold down screws holding the rotor on.. Did you remove them?

Then remove the caliper bracket and you should be able to slide the rotor off..

steveo135

are you talking about the bolt on the end of the axel?

If you put the tire on the car and lower it on the ground that will stop it from spinning while you break it loose

not sure if thats what your talking about though

Dogginator

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hastingsr &raquo;</TD></TR><TR><TD CLASS="quote">okay i got the cv nut off, now the rotor is frozen, any sugestions?</TD></TR></TABLE>

The rotor is stuck on the hub? Try the jacking screws on the rotor or a nice dead blow hammer.

hastingsr

thanks for the tips guys, i got it all figured out just in time, thanks to some friends of mine that came over to lend a hand also