Notices
Acura Integra All Integra Except ITR

HELP- car dies and when starts wont go past 3000rpm

Thread Tools
 
Search this Thread
 
Old 03-26-2005, 06:02 PM
  #1  
Thread Starter
 
h22teg's Avatar
 
Join Date: Apr 2004
Location: charleston, SC, USA
Posts: 259
Likes: 0
Received 0 Likes on 0 Posts
Default HELP- car dies and when starts wont go past 3000rpm

my car sputtered and died yesterday but after i put oil in it the car ran fine... today car sputtered and died and now wont start everytime only every once in a while... when the car does start now it will not cross over 3000 rpm its is like the rev limiter is now set at 3000.....anyone have this problem b4?
Old 03-26-2005, 06:07 PM
  #2  
Honda-Tech Member
 
stivic's Avatar
 
Join Date: Jul 2004
Location: Amissville, VA
Posts: 257
Likes: 0
Received 0 Likes on 0 Posts
Default Re: HELP- car dies and when starts wont go past 3000rpm (h22teg)

i did once when i chipped my ECU with a crappy 20 dollar Chip on ebay i hooked the jumper up wrong and it wouldnt rev past 3000 rpm but thats probably not the case in your situation is your check engine light coming on?
Old 03-26-2005, 06:19 PM
  #3  
Thread Starter
 
h22teg's Avatar
 
Join Date: Apr 2004
Location: charleston, SC, USA
Posts: 259
Likes: 0
Received 0 Likes on 0 Posts
Default Re: HELP- car dies and when starts wont go past 3000rpm (stivic)

no check engine light
Old 03-26-2005, 06:21 PM
  #4  
Honda-Tech Member
 
stivic's Avatar
 
Join Date: Jul 2004
Location: Amissville, VA
Posts: 257
Likes: 0
Received 0 Likes on 0 Posts
Default Re: HELP- car dies and when starts wont go past 3000rpm (h22teg)

check your timing and check your firing order with the spark plug wires from the dizzy if your firing order is off that could be the problem
Old 03-26-2005, 06:21 PM
  #5  
Honda-Tech Member
 
stivic's Avatar
 
Join Date: Jul 2004
Location: Amissville, VA
Posts: 257
Likes: 0
Received 0 Likes on 0 Posts
Default Re: HELP- car dies and when starts wont go past 3000rpm (stivic)

have you recently messed with the dizzy, spark plugs or spark plug wires
Old 03-26-2005, 07:00 PM
  #6  
Honda-Tech Member
 
Demon R's Avatar
 
Join Date: Feb 2004
Location: usa
Posts: 736
Likes: 0
Received 0 Likes on 0 Posts
Default Re: HELP- car dies and when starts wont go past 3000rpm (stivic)

you might need a new TPS
Old 03-26-2005, 07:38 PM
  #7  
Thread Starter
 
h22teg's Avatar
 
Join Date: Apr 2004
Location: charleston, SC, USA
Posts: 259
Likes: 0
Received 0 Likes on 0 Posts
Default Re: HELP- car dies and when starts wont go past 3000rpm (b18c1ntegra95)

the tps was unhooked for since the swap that was a few years ago and it has ran fine since then

to the others i havnt messed with the dizzy or the plugs or anything and this is the first mechanical problem ive ever had and ive had the car for over a year
Old 03-27-2005, 09:14 AM
  #8  
Thread Starter
 
h22teg's Avatar
 
Join Date: Apr 2004
Location: charleston, SC, USA
Posts: 259
Likes: 0
Received 0 Likes on 0 Posts
Default Re: HELP- car dies and when starts wont go past 3000rpm (h22teg)

bump... i put an ebay "chiped" ecu that i had bought a while ago in and the car would rev over 3k but after about 10 min of idleing it died.... im think a bad sensor
Old 03-27-2005, 09:34 AM
  #9  
B*a*n*n*e*d
 
The Phil's Avatar
 
Join Date: Nov 2004
Location: Nowhere and Everywhere
Posts: 1,986
Likes: 0
Received 0 Likes on 0 Posts
Default Re: HELP- car dies and when starts wont go past 3000rpm (h22teg)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by h22teg &raquo;</TD></TR><TR><TD CLASS="quote">bump... i put an ebay "chiped" ecu that i had bought a while ago in and the car would rev over 3k but after about 10 min of idleing it died.... im think a bad sensor</TD></TR></TABLE>

There's your problem. Ebay chips suck.
Old 03-27-2005, 04:39 PM
  #10  
Honda-Tech Member
 
stivic's Avatar
 
Join Date: Jul 2004
Location: Amissville, VA
Posts: 257
Likes: 0
Received 0 Likes on 0 Posts
Default Re: HELP- car dies and when starts wont go past 3000rpm (h22teg)

yeah the Ebay chip is most likely your problem see if u cant take it off mine just fell off since i suck at soldering lol but make sure u take off the jumpers and things that come with the chip

My problem was the jumper was soldered to the wrong hole, i fixed it and it ran fine ever since
Old 03-27-2005, 05:51 PM
  #11  
Thread Starter
 
h22teg's Avatar
 
Join Date: Apr 2004
Location: charleston, SC, USA
Posts: 259
Likes: 0
Received 0 Likes on 0 Posts
Default Re: HELP- car dies and when starts wont go past 3000rpm (stivic)

i just put in on for a second to see what it would do... im running a stock ecu... go read my post again
Old 03-28-2005, 08:15 PM
  #12  
Honda-Tech Member
 
stivic's Avatar
 
Join Date: Jul 2004
Location: Amissville, VA
Posts: 257
Likes: 0
Received 0 Likes on 0 Posts
Default Re: HELP- car dies and when starts wont go past 3000rpm (h22teg)

so you took the chip out? did u take the jumpers out too mine came with like 2 or 3 little ones besides the chip itself
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Downz
Acura Integra
1
04-24-2006 11:55 AM
CornFlake340
Honda Civic / Del Sol (1992 - 2000)
6
07-20-2005 08:48 PM
blacktallon2000
Honda CRX / EF Civic (1988 - 1991)
5
07-21-2004 03:50 PM
itsm3paul
Honda Civic / Del Sol (1992 - 2000)
1
05-10-2004 12:49 PM
daLixz25
Acura Integra
4
08-04-2003 09:12 PM



Quick Reply: HELP- car dies and when starts wont go past 3000rpm



All times are GMT -8. The time now is 01:54 PM.