heater bypass- temp gauge bounces from c to normal
#1
Honda-Tech Member
Thread Starter
Join Date: Jul 2013
Location: sleeping in a 368k 95 gs-r
Posts: 1,975
Likes: 0
Received 41 Likes
on
41 Posts
heater bypass- temp gauge bounces from c to normal
i farked the heater core connections to get out rear motor mount so i disconnected the passenger side heater hose from the heat switch and plugged it into the engine where the other hose goes. now i cant seem to get all the air out. jacked front up as high as possible,
kept fluid topped off. opened nipple with cap on and off. doesnt seem to be any more air coming out. temp gauge is mostly on c but will move up to norm sometimes. everything worked fine before this . wtf?!?
kept fluid topped off. opened nipple with cap on and off. doesnt seem to be any more air coming out. temp gauge is mostly on c but will move up to norm sometimes. everything worked fine before this . wtf?!?
#2
Honda-Tech Member
Thread Starter
Join Date: Jul 2013
Location: sleeping in a 368k 95 gs-r
Posts: 1,975
Likes: 0
Received 41 Likes
on
41 Posts
Re: heater bypass- temp gauge bounces from c to normal
never mind, loose connection at temp sensor.
today it would just sit at c unless i made a right turn at 40 or over
which then completed the connection temporarily lol.
must have knocked it loose while i was pulling upper trans mount
for window weld job. seemed to be getting better mpg while
this issue was going on too, weird.
today it would just sit at c unless i made a right turn at 40 or over
which then completed the connection temporarily lol.
must have knocked it loose while i was pulling upper trans mount
for window weld job. seemed to be getting better mpg while
this issue was going on too, weird.
Last edited by tamboo; 07-15-2015 at 02:34 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Kalen13
Honda CR-V & Element
3
01-18-2018 11:04 AM