Header Donut Gasket
#1
Honda-Tech Member
Thread Starter
Join Date: Sep 2005
Location: Knoxville, TN, United States
Posts: 2,905
Likes: 0
Received 1 Like
on
1 Post
Header Donut Gasket
I want to order this eBay header, but it doesn't come with a donut gasket, just a flat one. Do I need to source a 2" donut gasket? I'm assuming my stock '90 gasket is 1.75" or less
http://cgi.ebay.com/ebaymotors/1990-...65%3A15|39%3A1
http://cgi.ebay.com/ebaymotors/1990-...65%3A15|39%3A1
#3
Honda-Tech Member
Re: Header Donut Gasket
please keep your oem manifold over that POS
if you don't..and i hope you do..BUT if you just have to have one of those
you're stock donut will fit it, they almost always can be reused.
as to the size. a 2" will measure 1.75 inside
if you don't..and i hope you do..BUT if you just have to have one of those
you're stock donut will fit it, they almost always can be reused.
as to the size. a 2" will measure 1.75 inside
#5
Reject Papi
iTrader: (1)
Join Date: Oct 2007
Location: chambersburg, pa 17202
Posts: 14,459
Likes: 0
Received 0 Likes
on
0 Posts
Re: Header Donut Gasket
its one of thoe ebay "stainless steel" ones that will crack over time. i've seen some ebay cheapies work well, but it all depends on which ones you get. i just looked at that link, and i have to agree, you won't notice a difference in performance with that thing. if anything, get a dc sports, greddy, megan ect...
#6
Honda-Tech Member
Thread Starter
Join Date: Sep 2005
Location: Knoxville, TN, United States
Posts: 2,905
Likes: 0
Received 1 Like
on
1 Post
Re: Header Donut Gasket
One thing to remember is the 90/91 stock manifold is 4-1, 92+ were all 4-2-1, so it's pretty easy to out perform the stock 90/91 manifold
Thread
Thread Starter
Forum
Replies
Last Post