Harmonic Balancer Puller for Crank bolt?
#1
Honda-Tech Member
Thread Starter
Join Date: Jul 2006
Location: Oklahoma/Texas
Posts: 1,312
Likes: 0
Received 0 Likes
on
0 Posts
#3
Re: Harmonic Balancer Puller for Crank bolt? (BoltonGSR)
I used a tool similar to this, only $15
http://www.amazon.com/Alltrade...&s=hi
but mine was alittle different. You use a 1/2 inch breaker bar with this tool to hold the crankshaft pulley still, then use another 1/2 inch breaker bar with a socket to break the crank pulley bolt loose.
http://www.amazon.com/Alltrade...&s=hi
but mine was alittle different. You use a 1/2 inch breaker bar with this tool to hold the crankshaft pulley still, then use another 1/2 inch breaker bar with a socket to break the crank pulley bolt loose.
#4
Honda-Tech Member
Thread Starter
Join Date: Jul 2006
Location: Oklahoma/Texas
Posts: 1,312
Likes: 0
Received 0 Likes
on
0 Posts
Re: Harmonic Balancer Puller for Crank bolt? (Sam92Teg)
Im guessing you screw those bolts into that metal piece into the pulley? But i just dont see it works...
#5
Honda-Tech Member
Thread Starter
Join Date: Jul 2006
Location: Oklahoma/Texas
Posts: 1,312
Likes: 0
Received 0 Likes
on
0 Posts
Re: Harmonic Balancer Puller for Crank bolt? (BoltonGSR)
Ok, i got the pully holder tool now. How am i supposed to hold it in place? Its got a place for a half inch drive to go, i guess i need some to hold in place while i break the bolt loose?
Thread
Thread Starter
Forum
Replies
Last Post
bradley
Honda Civic / Del Sol (1992 - 2000)
13
01-09-2012 02:12 PM