Wheel/Tire?
#1
Honda-Tech Member
Thread Starter
Join Date: Mar 2012
Location: San Antonio, Tx
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Wheel/Tire?
I just bought new 195/60/14 tires to find out one of my wheels is bent I was looking at http://www.bassettwheel.com/14x7_14x8_dhole.html in 14x7 with a 3.625 backspace, will these fit and how much will it stick out? I have a 95 DB teg.
#2
Honda-Tech Member
Join Date: Oct 2006
Location: Where We Squeeze 1st N Ask Questions Last, CA, USA
Posts: 3,171
Likes: 0
Received 0 Likes
on
0 Posts
Re: Wheel/Tire?
I just bought new 195/60/14 tires to find out one of my wheels is bent I was looking at http://www.bassettwheel.com/14x7_14x8_dhole.html in 14x7 with a 3.625 backspace, will these fit and how much will it stick out? I have a 95 DB teg.
#5
Honda-Tech Member
Join Date: Mar 2004
Location: Sunny SoCal
Posts: 1,290
Likes: 0
Received 0 Likes
on
0 Posts
Re: Wheel/Tire?
It sounds like you want to buy one of these wheels to replace just the bent one. Then you would have mismatched wheels. Not just in appearance but in offset, etc. Can you not find an exact replacement for your wheel?
Either way I don't think any of those on your link is the correct backspacing. I think the correct backspacing would be something like 4.878" to 5.272" but I'm not absolutely certain. Offset is the more common spec. Should be between +35 to +42, but probably closer to the +35 end for a 14" wheel.
Either way I don't think any of those on your link is the correct backspacing. I think the correct backspacing would be something like 4.878" to 5.272" but I'm not absolutely certain. Offset is the more common spec. Should be between +35 to +42, but probably closer to the +35 end for a 14" wheel.
Thread
Thread Starter
Forum
Replies
Last Post
arjnmrskr213
Honda Civic / Del Sol (1992 - 2000)
4
12-02-2016 08:10 PM