PreyStayShun

Short story long:

Purchased a JDM ITR 24mm Front Swaybar (from what i understand gsr/type r utilize the same front bars)

It did come w/all hardware but the bar is used, so at worst i wanted new endlinks... either OEM or aftermarket.

Looking around I stumbled upon energy suspension enlinks and figured what the hell, i'll purchase them (@ $25 shipped I figured why not?) In receiving the endlinks I noticed they must be the wrong ones even though energy suspensions website claims their front endlinks work on all integras. Of course I received the straight version endlinks (must be for LS/RS/GS) and not the version w/the 90 angle (pictured below)

http://www.partsamerica.com/ProductD...ype=78&PTSet=A

I'm not crazy right, I do need the endlinks pictured above??? I have done a little bit of searching on this topic but wanted reaffirmation, sorry to bring this back from the dead. Anyone know the OEM part number the the GSR/Type R endlinks by chance???

Happy Holidays All!!!

PreyStayShun

XMas Bump...because 43 views and no decent answer!

Happy Holidays!

sitinduk

I think your supposed to only replace the the 4 rubber bushings (2 per side) and use the oem end link.

thabao

why didnt you just buy OEM endlinks? they are about $20-30.

PatrickGSR94

iTrader: (1)

The 22mm front bar on older LS/RS Integras had horizontal ends that used the straight-style end link.

All 24mm front bars (used on all GS-R, ITR, and later LS/RS models, which BTW your front bar is not specific to JDM ITR's) have vertical ends that use the 90-deg. style end link.

The 90-deg. end links are $34 each from Carland Acura www.acuraautomotiveparts.org

red98integra

i have one oem endlink i could sell to you if you are interested...ive decided to switch to the LS sway cuz im tired of ripping endlinks

PreyStayShun

Thanks everyone, that squares me away. Appreciate the help as always HT