integra3586

how are the belts run? i know the supercharger shares a belt now with the ac, does that now run on the orignal groove from the powersteering on the harmonic balancer? and the ac and the supercharger use the original ac groove on the harmonic balancer? if that is the case i do not understand how all the components still line up properly on the harmonic balancer.


Modified by integra3586 at 10:37 PM 8/30/2005

integra3586

EnjoyTheRideDC2

iTrader: (1)

The supercharger pulley is placed in between the power steering and AC compressor pulley. The Supercharger Drive Belt wraps onto the PS pulley, then through the Supercharger pulley, onto the AC Pulley, then onto the harmonic balancer, which finally leads the belt back up to the PS pulley.

They all line up because the bracket attached to the supercharger pulley adjusts the placement of the pulley to its necessary position.

dategb16vortech

when I had mine on my b16a the a/c belt ran the charger and ps belt was by itself with a ps pump relocation bracket that just moves it forward a little to clear the supercharger drive belt