Distributor fitment issues.
#1
Distributor fitment issues.
I swapped a b16a2 into my 91 DA9 and converted to obd1. The motor was missing a dizzy so I ordered a 94-95 del sol b16a3 dizzy (since its obd1) from Auto Zone. I was told any b16 dizzy would work but when I went to bolt this one up this is what happened.
The bottom is hitting the vtak pressure switch! so I can't line it up!
The bottom is hitting the vtak pressure switch! so I can't line it up!
#4
Re: Distributor fitment issues.
They probally gave you a sohc one. If you have the box go to the autozone site and search the part number, if its the wrong one id bring it back and ask them to compensate you for labor also, tell them you had to pay a mechanic to put it on.
If its the same part number eather it was a packaging issue (and alls you can do is swap it out) or your a moron and don't know how to install a distributor
If its the same part number eather it was a packaging issue (and alls you can do is swap it out) or your a moron and don't know how to install a distributor
Thread
Thread Starter
Forum
Replies
Last Post
lunalink
Honda CRX / EF Civic (1988 - 1991)
11
09-19-2009 04:16 AM
malo11
Honda Civic / Del Sol (1992 - 2000)
6
10-16-2007 07:03 AM
hughesl
Honda CRX / EF Civic (1988 - 1991)
7
10-09-2007 04:22 AM