darton MID sleeves
#1
Honda-Tech Member
Thread Starter
Join Date: May 2013
Posts: 344
Likes: 0
Received 0 Likes
on
0 Posts
darton MID sleeves
Hey, has anyone used or known someone that has this. Is it a good product? ( Quality etc)
And where can i get this installed, I live in New Jersey.
Thanks~~
And where can i get this installed, I live in New Jersey.
Thanks~~
#2
Honda-Tech Member
Re: darton MID sleeves
They're good, lots of pll run them with no issues, I've heard aebs and golden eagle are better but cost more. what mm are you going with hope it's 85 if you're getting it sleeved. idk look around for machine shops in your area the whole proces will run you excess of 1K.
#3
Honda-Tech Member
Thread Starter
Join Date: May 2013
Posts: 344
Likes: 0
Received 0 Likes
on
0 Posts
Re: darton MID sleeves
yes i wanted to go 85 mm, and a 92 mm crank . But i have been reading around and people say the sleeves sink? What exactly does this mean anyone can clear this up?
#4
Honda-Tech Member
Re: darton MID sleeves
they literally sink into the block as in not flush with the deck thus causing issues, this is more related to how they're installed vs the sleeve them selves. Make sure when you get it done a reputable shop that knows Honda's does it. you can google around more about sleeve sink but that's the basic of it.
Thread
Thread Starter
Forum
Replies
Last Post