Crank Pully
11-12-2006, 08:26 AM
#1
Honda-Tech Member
Thread Starter
Join Date: Jul 2006
Location: schenectady, N.Y., USA
Posts: 696
Likes: 0
Received 0 Likes
on
0 Posts
Crank Pully
Trying to put my new toda timing belt on and i cant get the Crank pully off. I Just had a 3ft pipe on the end of my breaker bar and it snapped. How tight is this thing on!? Is the bolt reverse thread?
11-12-2006, 08:45 AM
#2
Darth ModerVader
Re: Crank Pully (str8JDMteggy)
It's on very tight, and no, it's not reverse thread. The easiest way to remove it is with a powerful impact gun. If you were anywhere near the NYC metro area, I'd happily do it for you and hand tighten it so you could return home and do the work.
11-12-2006, 08:48 AM
#3
Honda-Tech Member
Thread Starter
Join Date: Jul 2006
Location: schenectady, N.Y., USA
Posts: 696
Likes: 0
Received 0 Likes
on
0 Posts
Yeh thanks but i cant drive the car. The head was off so the timing belt isnt even on. Im just afriad of breaking the bolt in the crank.
Thread
Thread Starter
Forum
Replies
Last Post
