Installing Flywheel????difficult?
#1
Honda-Tech Member
Thread Starter
Join Date: Mar 2001
Location: San Luis Obispo, CA
Posts: 1,550
Likes: 0
Received 0 Likes
on
0 Posts
Installing Flywheel????difficult?
I will be switching out my tranny soon and want to install a lightened flywheel at the same time. Is the installation process hard so long as you make sure everything is torqued down correctly???
is there anything i should look out for or any tips people have to offer??
is there anything i should look out for or any tips people have to offer??
#2
Honda-Tech Member
Join Date: Apr 2002
Location: I wish I were in..., Osaka, JAPAN
Posts: 2,313
Likes: 0
Received 1 Like
on
1 Post
Re: Installing Flywheel????difficult? (AK94GSR)
Hard part is dropping the tranny. After the tranny is out of the way,you pretty much just unbolt the old flywheel and bolt up the new one. There is a certain pattern that you must torque down to bolts but other than that...simple. Also, you may want to use locktite on the bolts to prevent them from backing out, you will need 17mm 12pt socket and 76ft/lbs is the torque specs for the flywheel bolts. HTH
Edit: Whoops should be 17mm 12pt socket not 12mm. Sorry.
[Modified by Eva01, 9:26 PM 3/21/2003]
Edit: Whoops should be 17mm 12pt socket not 12mm. Sorry.
[Modified by Eva01, 9:26 PM 3/21/2003]
#3
Honda-Tech Member
Thread Starter
Join Date: Mar 2001
Location: San Luis Obispo, CA
Posts: 1,550
Likes: 0
Received 0 Likes
on
0 Posts
Re: Installing Flywheel????difficult? (Eva01)
Yeah i got a helms, but just wanted to see if anyone had anytips for me to ease my installation.
if anyone else has any please let me know
thanks Eva01
if anyone else has any please let me know
thanks Eva01
#4
Honda-Tech Member
Thread
Thread Starter
Forum
Replies
Last Post
regal1975
Honda CRX / EF Civic (1988 - 1991)
2
12-02-2007 02:17 PM
Soccerking3000
Honda Civic / Del Sol (1992 - 2000)
18
01-06-2004 08:17 PM