rattling sound at around 3k -3.5k rpm, what's ur suspect?
12-07-2006, 01:01 AM
#1
Honda-Tech Member
Thread Starter
Join Date: Sep 2006
Location: lake forest, ca
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
rattling sound at around 3k -3.5k rpm, what's ur suspect?
could it be heat shield?
or exhaust manifold?
i've searched but i ended up to those two questions above,
if someone can tell any'bout it will be appreciated,
thanks,
O J
or exhaust manifold?
i've searched but i ended up to those two questions above,
if someone can tell any'bout it will be appreciated,
thanks,
O J
12-07-2006, 01:06 AM
#2
Honda-Tech Member
Join Date: Jun 2004
Location: Miami, Fl, USA
Posts: 4,215
Likes: 0
Received 0 Likes
on
0 Posts
Re: rattling sound at around 3k -3.5k rpm, what's ur suspect? (llozll)
Most likely your cat heatshield, just get under the car and check them out. And sometimes it could just be a couple rocks got trapped in between and are rattling around. If its the heatshild you can just remove them.
Ali
Ali
12-07-2006, 04:48 AM
#4
Re: (ILoveJDM.)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ILoveJDM. »</TD></TR><TR><TD CLASS="quote">I have never heard an Integra that doesnt rattle... Maybe its just me though!</TD></TR></TABLE>
This guy speaks the truth.
My brothers dc2 does nothing but rattle.
This guy speaks the truth.
My brothers dc2 does nothing but rattle.
Trending Topics
12-07-2006, 03:47 PM
#8
Member
Join Date: Apr 2006
Location: CA
Posts: 4,796
Likes: 0
Received 0 Likes
on
0 Posts
mine was from my headers. theres a heat sheild on the front of the header and one behind it. the one behind it is a bitch to get out you have to take the whole headers out to take it off. after i purchased new headers the sound went away.
12-07-2006, 07:09 PM
#9
Junior Member
Join Date: Nov 2006
Location: Westminster, ca, usa
Posts: 349
Likes: 0
Received 0 Likes
on
0 Posts
Re: rattling sound at around 3k -3.5k rpm, what's ur suspect? (llozll)
is your exhaust manifold stock. my stock manifold was rattling because it id double walled and the weld broke internally and would rattle at certain rpms. it was impossible to weld so replace it with a dc header(considered stock replacement part).
12-07-2006, 07:36 PM
#10
Honda-Tech Member
Join Date: Jul 2006
Location: Oklahoma/Texas
Posts: 1,312
Likes: 0
Received 0 Likes
on
0 Posts
Re: rattling sound at around 3k -3.5k rpm, what's ur suspect? (99Geeezer)
I had this problem once, at only certain rpm like that. I took half of the heat shield off the cat and bolted down only the top half... it stopped...
12-07-2006, 07:39 PM
#11
Honda-Tech Member
I also had this problem, if you have an older aftermarket exhaust like DCSports it could be the resonator as well as the muffler packing inside..........
more than likely its a heatshield........
more than likely its a heatshield........
Thread
Thread Starter
Forum
Replies
Last Post
