honda_gsr_b18c

i have a 94 gsr and i slowed down at a stop and it was like going five miles a hour and i dropped in into 1st and then my clutch stuck to the floor and and i had to push the gears in to make it home and the next day i tried to start it and it wouldnt start its not the relay and i bleed the clutch and changed the master clutch cylinder so i am out of ideas i need help please help

db-1charlie

throw up bearing is busted.

dudesitsjdm

this is it for sure.throw out bearing

honda_gsr_b18c

ok thanks i will check that cause i replaced my slave and clutch sensor so i will check it and let ya know

honda_gsr_b18c

also i forgot to mention that when i turn the key it does nothin at all like the clutch aint pushed in but i checked the sensor right there under the dash the bottom one does anyone know what the top sensor is also

dudesitsjdm

do your lights in the dash come on? are you getting power?

honda_gsr_b18c

ok your not gonna believe this but i figured it might be the safety switch right so i am puttin the new one in and notice the small piece of plastic on the clutch petal that pushes the button on it is missin it had broken off the same time the slave went bad cause thats what caused my clutch to stick so needless to say i was kinda mad when i found out it was something that simple but thanks for helping me