Well most people know that the stock older version of the exhaust cam seal on our motors sucks *** and are a common cause of leakin oil. My car had this problem and to solve it, I ordered a Golden Eagle cam seal from motormatrix.com in the best buy forum and consequently wrote up an install guide for it to help anybody else who may be interested in doing this.
I know that team-integra has an article up about this... but I think mine has better pics. hehe... and its on a B18B1 motor!
I thought this one would be good for the archives as well.... here ya go guys.. hope u find it helpful.
Re: Cam Seal Replacement Install Guide (PatrickGSR94)
I was thinkin about it... but the OEM one i had in there didnt have any on it. so i didnt... but if it does leak.. i'll crack it open again and redo it. But honestly, the rubber seals are so much bigger than the nonexistant stock ones that i'm not too worried about it. Plus i applied some hondabond to the inside area around the cam seal just not so much in the middle.
Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for Honda-Tech.com content, comments, or advertising. Honda-Tech.com is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse Honda-Tech.com in any way.
Copyright/trademark/sales mark infringements are not intended or implied.