da9_jake

Hey guys im gonna rebuild my b18a1 anf pretty much get it ready for turbo and i was just wondering what parts i should get. Ive been recommened forged internals and b16 pistons and rods ect. My plan is to bore it out .30 over but i was just gonna ask the shop for the piston size that would be right. So does anyone have a good list of parts for me to reference off of? Anything would help. Thanks.

wunfstgsr

read the FAQ at the top of the forced induction forums and search for your answers there.

B_Swapped93

lol b16 rods with an 89mm stroke ok.... stock p30 rods/pistons are just that stock cast rods far from forged. Power goals are needed first before you can plan ANYTHING

da9_jake

Aight thanks man ill referance that.

da9_jake

My friend had his b18b1 rebuilt at a shop ans he gained 60+ horse. I was thinking something along that line or just as much possible i can get out of low compression internals.

B_Swapped93

rebuilt how! yah sure if you have 110 compression 1-4 then rebuilding it would net that... that's so vague it's not funny, i'm rebuilding my k20 too....going to pump e85 though it tho on a 6766. Details man not being a dick just stating what you're missing.

da9_jake

I know what im missing haha. I am just trying to find a list of parts that would be good to rebuild my motor so i can start ordering stuff. Im not very good with internal motor parts thats why i posted but i will do some research so i can better understand. I caused some confusion there sorry for not being detailed enough.

da9_jake

And i wanna get it ready for turbo so thats mainly how i want it rebuilt. i would like to get about 200+ hp out of it after i get done with internals.