BC Cams for b20b
#1
BC Cams for b20b
So i need advice on some BC cams. I want the cammed sound and also want to put aftermarket cams in as well so i've googled brian Crower 404s and alot all motor b18b and b20b sound good with them. I know i'd be needing a tune when im doing mods like cam gears/cams etc etc but my question is, what cams do i need to achieve the cammed sound.
I know this DA is boosted but im sure without the boost it would still have the "cammed" sound.
1990 Turbo Integra DA9 Crower 404's Idling
Keep bullshit out of this thread.
And i'd be staying low compression and does it matter if its non-vtec b20 or b20vtec?
edit: it dont have to be BC cams but any brand cams that can give me that sound :skunk2,blox...etc etc
I know this DA is boosted but im sure without the boost it would still have the "cammed" sound.
1990 Turbo Integra DA9 Crower 404's Idling
Keep bullshit out of this thread.
And i'd be staying low compression and does it matter if its non-vtec b20 or b20vtec?
edit: it dont have to be BC cams but any brand cams that can give me that sound :skunk2,blox...etc etc
#2
Retired Moderator
iTrader: (8)
Re: BC Cams for b20b
So i need advice on some BC cams. I want the cammed sound and also want to put aftermarket cams in as well so i've googled brian Crower 404s and alot all motor b18b and b20b sound good with them. I know i'd be needing a tune when im doing mods like cam gears/cams etc etc but my question is, what cams do i need to achieve the cammed sound.
I know this DA is boosted but im sure without the boost it would still have the "cammed" sound.
1990 Turbo Integra DA9 Crower 404's Idling
Keep bullshit out of this thread.
And i'd be staying low compression and does it matter if its non-vtec b20 or b20vtec?
edit: it dont have to be BC cams but any brand cams that can give me that sound :skunk2,blox...etc etc
I know this DA is boosted but im sure without the boost it would still have the "cammed" sound.
1990 Turbo Integra DA9 Crower 404's Idling
Keep bullshit out of this thread.
And i'd be staying low compression and does it matter if its non-vtec b20 or b20vtec?
edit: it dont have to be BC cams but any brand cams that can give me that sound :skunk2,blox...etc etc
Also, you just cant throw a set of stage 3-4 cams in with out:
1. degreeing
2. new seats, springs, retainers
3. new headgasket
4. tune
5. New studs (since they are not re-usable)
6. probably something else im leaving out..
Alot of work just to make your engine sound "cammed"
#3
Re: BC Cams for b20b
Kinda hard to keep the bullshit out of this thread when your looking for cams for just some bullshit sound..
Also, you just cant throw a set of stage 3-4 cams in with out:
1. degreeing
2. new seats, springs, retainers
3. new headgasket
4. tune
5. New studs (since they are not re-usable)
6. probably something else im leaving out..
Alot of work just to make your engine sound "cammed"
Also, you just cant throw a set of stage 3-4 cams in with out:
1. degreeing
2. new seats, springs, retainers
3. new headgasket
4. tune
5. New studs (since they are not re-usable)
6. probably something else im leaving out..
Alot of work just to make your engine sound "cammed"
#4
Retired Moderator
iTrader: (8)
Re: BC Cams for b20b
for everything your looking at:
cams- non-vtec 350
springs/ret - 300
HG- 65-80
cam gears -150
ARP studs - 135
tune - 300ish
you can use Crower stage 1's that drop in w/o any work. U wont get that cam "sound" unless you dig deeeeep into your pockets. Usually those are built engines.
If you want a cam sound, try a V8 cuz on a 4 banger, youll have to spend some $$$$
heres a link to crower
http://www.crower.com/cat/import/honda/cams/b18ab.shtml
cams- non-vtec 350
springs/ret - 300
HG- 65-80
cam gears -150
ARP studs - 135
tune - 300ish
you can use Crower stage 1's that drop in w/o any work. U wont get that cam "sound" unless you dig deeeeep into your pockets. Usually those are built engines.
If you want a cam sound, try a V8 cuz on a 4 banger, youll have to spend some $$$$
heres a link to crower
http://www.crower.com/cat/import/honda/cams/b18ab.shtml
#5
Re: BC Cams for b20b
for everything your looking at:
cams- non-vtec 350
springs/ret - 300
HG- 65-80
cam gears -150
ARP studs - 135
tune - 300ish
you can use Crower stage 1's that drop in w/o any work. U wont get that cam "sound" unless you dig deeeeep into your pockets. Usually those are built engines.
If you want a cam sound, try a V8 cuz on a 4 banger, youll have to spend some $$$$
heres a link to crower
http://www.crower.com/cat/import/honda/cams/b18ab.shtml
cams- non-vtec 350
springs/ret - 300
HG- 65-80
cam gears -150
ARP studs - 135
tune - 300ish
you can use Crower stage 1's that drop in w/o any work. U wont get that cam "sound" unless you dig deeeeep into your pockets. Usually those are built engines.
If you want a cam sound, try a V8 cuz on a 4 banger, youll have to spend some $$$$
heres a link to crower
http://www.crower.com/cat/import/honda/cams/b18ab.shtml
So what cams will get me performance gains without with any work of course with a tune but something that i wont need new retainers and such
#7
Honda-Tech Member
Join Date: May 2009
Location: Saint Paul, Minnesota
Posts: 1,102
Likes: 0
Received 0 Likes
on
0 Posts
Re: BC Cams for b20b
Is that a serious question? LS valve springs are weak, and will not hold. Have you ever heard of valve float? No, if you think it is the same as a root beer float, then we are done.
Trending Topics
#8
Re: BC Cams for b20b
People like you who make HT suck donkey ***** !
STFU and don't post, simple as that.
I got a b20b head. Not LS but i would plan on getting a GSR head or b16 to go b20vtec. But i also want something for performance as well.
#9
Retired Moderator
iTrader: (8)
Re: BC Cams for b20b
here it is since you missed it twice:
you can use Crower stage 1's that drop in w/o any work. U wont get that cam "sound" unless you dig deeeeep into your pockets. Usually those are built engines.
If you want a cam sound, try a V8 cuz on a 4 banger, youll have to spend some $$$$
heres a link to crower
http://www.crower.com/cat/import/honda/cams/b18ab.shtml
If you want a cam sound, try a V8 cuz on a 4 banger, youll have to spend some $$$$
heres a link to crower
http://www.crower.com/cat/import/honda/cams/b18ab.shtml
So what cams will get me performance gains without with any work of course with a tune but something that i wont need new retainers and such
Its people like you who make HT so difficult to give info to because everyone is lazy and wont do their own research and have to be spoon fed info.
Thread
Thread Starter
Forum
Replies
Last Post