B20... what to do.
#1
Junior Member
Thread Starter
Join Date: Jul 2005
Location: Norwalk, CA, United States
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
B20... what to do.
anyone have any suggestions for my b20?? I was thinking that I should just build it up and make it one badass b20...others want me to turbo it.. ehh... nitrous... no.... any other suggestions? thanks.!
#4
Re: B20... what to do. (SiRk)
ok...basiclly you can do all motor CRVTEC set up..just get you a vtec head..the stock bottom end can take all motor pretty good.if you want to run turbo keep in mind that the bore on the B20 is 84mm so the piston walls are already thin, alot of peolpe start running boost on factory B20 and POOF!...if you wanna do very much boost at all youll really need to get the block sleeved which will run you aorund 1000$ but its the only way youll know that it will handle it. and i sure someone will get on here and say "oh ive ran 14psi on a factory B20 and it did fine," but fact of the matter is that your only suppose to run 10psi MAX on a gsr or type r factory bottom so how could you run it on a nonvtec B20 block. just take your time and set a goal and do it..if you wanna do boost, sleeve the block and have at it..if you wanna do all motor thats fine too if youve ever seen a dyno sheet of a B20 VTEC all motor the torque curves spikes fasts and holds thoughout rpm range as a boost car does not..well up to you good luck with whatever you do
#7
Junior Member
Thread Starter
Join Date: Jul 2005
Location: Norwalk, CA, United States
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
allright... thanks for the suggestions...I think all motor seems like the best choice... but.. I'll keep turbo in mind if I find some money... what cams are good for aB20??? any other suggestions on parts??
Trending Topics
#8
Honda-Tech Member
Join Date: Aug 2004
Location: New Mexico, Mexico, 95111
Posts: 515
Likes: 0
Received 0 Likes
on
0 Posts
Re: (SiRk)
ummm.. b20 turbo?? not a good idea... b20 is best of b20 vtec...
since ur gonna do a all motor.. your gonna need a b16 head, very aggressive, with that head u should get some skunk2 cams.... u will feel he power of vtec..
but motor does cost a lot of money so good luck..
I boost all day long.. better, and cheaper..
since ur gonna do a all motor.. your gonna need a b16 head, very aggressive, with that head u should get some skunk2 cams.... u will feel he power of vtec..
but motor does cost a lot of money so good luck..
I boost all day long.. better, and cheaper..
#9
Junior Member
Thread Starter
Join Date: Jul 2005
Location: Norwalk, CA, United States
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
I have the b20 and a b16 head already... so buying a motor isn't the problem...I really want to do the b20 vtec... are what do I need... to buy or to have done to my b20 so that I can put the b16 head on it??
Thread
Thread Starter
Forum
Replies
Last Post
X2BOARD
Forced Induction
154
08-20-2014 10:09 PM