ubreak_ubuy

hey guys, i just sent in my block last week to the machine shop to get some new pistons, rings and bearings installed. they called me today and said the crank is frozen. meaning the bearings are too thick. Im running brand new OEM Honda bearings and im sure i got the correct codes for the proper color bearing for each journal. i triple checked everything and positive the colors are correct. is it possible for the bearings to actually be too thick even if i followed the crank and block codes correctly? i was also told it may not fit correctly even if you do follow the OEM codes due to crank wear so i would have to plastigauge all the bearings. But i would assume from crank wear, bearings should fit loose instead of too tight. Im not sure if the the shop is installing them in the wrong place or i need to buy smaller bearings. anyone have any suggestions? thanks

saleensolution

it is possible that it is too thick. you probably got bearings for a ls instead of your b18c motor i had the same problem wiht a guys motor he ordered the wrong bearings. make sure that you dont have ls bearings

garados

iTrader: (3)

Yeah, make sure they're for the b18c1. My first set of bearings were for an ls, so they were too wide and they caused the crank to bind. Good luck mang

NJIN BUILDR

If they can't tell that the rod bearings were to wide before installing them you need to find another shop.The ls and gsr mains are the same spec.s
Glenn

saleensolution

mu bad it was the ROD bearings that were too fat. are the rod bearings ok?

ubreak_ubuy

im waiting for the shop to call me back to see which bearings are off. there going to plastigauge everyone to check. im pretty sure i got the right ones, got the part number for gsr bearings off acuraparts247.com. well we'll see. ill get u guys know. thanks everyone.

saleensolution

you can plastigauge the clearences and it cad be fine but they dont rotate the moter when they do it. so the clearance can be ok but that has nothing to do with the bearing being to wide for the journal