B18b1 Pcv valve problem
#1
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Dec 2010
Location: Los Angeles, CA 213
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
B18b1 Pcv valve problem
Hello integra fellas. I just bought my 1st96 integra with engine b18b1 that has abunch of hose missing. The most important to me is to get the pcv valve connected asap but im having a hard time figuring how it connects. I see a hole near the intake runners and nothing is there also the pcv hose from the intake its missing and blocked off with a sticker. I need help to connect it from the bottom as i dont know where it connects. Can one of you acuras gurus show me the ropes and picture from the bottom to see where it connects too. TIA.
Last edited by mrprofits1; 05-25-2016 at 07:51 AM.
#2
Honda-Tech Member
Re: B18b1 Pcv valve problem
on a B18B/B20, the PCV hose runs directly from the back center of the valve cover to the intake manifold. the hose goes straight in, only one spot the hose can physically fit in.
#4
Honda-Tech Member
#5
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Dec 2010
Location: Los Angeles, CA 213
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
Re: B18b1 Pcv valve problem
thanks everyone. found out my integra has an later b18b1 with an early b18b1 valve cover. i need a valve cover with the pcv valve that is on the top of the valve cover.
Thread
Thread Starter
Forum
Replies
Last Post
Wazup
Honda Civic / Del Sol (1992 - 2000)
4
06-28-2019 09:33 AM