Spacers on rpf1s.
#5
Honda-Tech Member
Re: Spacers on rpf1s.
yeah of course, these are 195/55/15 that came off my gsr blades. didnt want to spend money on 205/50/15. next set...
rubs like mad with people in there on right turns. also, my cambers settings are in factory spec, almost 0 degrees.
rubs like mad with people in there on right turns. also, my cambers settings are in factory spec, almost 0 degrees.
#6
Re: Spacers on rpf1s.
yeah i agree with you though...iono it all depends the op wasnt even specific about his height, his camber, what size rpf1s hes planning on...we still have no clue
Trending Topics
#8
Honda-Tech Member
iTrader: (1)
Join Date: Jan 2002
Location: Nowhere and Everywhere
Posts: 29,530
Likes: 0
Received 52 Likes
on
46 Posts
Re: Spacers on rpf1s.
However I did used to scrape the frame rail seam under the front fenders with 195/55-15. I personally hate that tire size. I'll be going with 195/50-15 for my stock wheels next time.
OP don't use spacers. Get wheels in the offset you want to get the look you want.
#9
Honda-Tech Member
Re: Spacers on rpf1s.
patrick: i never said oem spec is 0 degrees, i said my camber settings are almost at 0 degrees. it ranges from -0.2 to -0.5 on at all corners.
195/55/15 is a comfy size, i personally wouldn't use 195/50/15 because its going to make the odo read too fast. 205/50/15 might be the best compromise.
195/55/15 is a comfy size, i personally wouldn't use 195/50/15 because its going to make the odo read too fast. 205/50/15 might be the best compromise.
Thread
Thread Starter
Forum
Replies
Last Post
shahriar35
Acura Integra Type-R
8
12-16-2014 08:07 AM