moncrease

ON 94 LS WHAT COLOR WIRES ON MY O2 SENSOR DO I HOOK THE AIR FUEL RATIO GAUGE

Korch94

hooking it up to the wires at the ecu is easiest. hook your ground wire up to a ground obviously and the other wire up to d14


http://www.team-integra.net/fo...age=1

IanB

Hooking up a gauge to display narrowband O2 sensor output is useless. The narrowband can ONLY tell if you are at 14.7 (ideal emmisions A/F ratio), or if you are higher or lower, but not by how much. Any time you are at wide open throttle you will want to be in the range of 12.5-13.5 for an NA engine, narrowband can't help you with that.

evolved4g63

^ I'm with this guy. Narrowband gauges are useless. Save up some more money and get yourself a wideband.

socal-db8

k on my 95 i had a grip of trouble finding the right wire but i finnally found it its a white wire with a red stripe (D14-PHO2S O2 sensor White, heated 02 sensor Signal)


http://hybrid.honda-perf.org/tech/info.html#tech bout half way down the page it says
" ECU Pinouts
EG series Civic (5G, 92-95) and DC series Integra (3G, 94+) " and the diagram is right bellow it just make sure to solder it in , i didnt at first a nd the readins were all over the place


good luck