SupRlude01

I have a 99 LS integra, and its throwing a code 8 (TDC). My car starts and drives fine. Ive had this cel on for 6 months and need to get rid of it ASAP. I know its not in the distributor cause its OBDII. I dont think theres anything really wrong with the sensor but does anyone have any ideas to troubleshoot? Does anyone know what PIN it is on the ECU?

TomsDC

how often have you cleared the ecu? if you have how long does it take to come back on?

SupRlude01

Well i replaced the spark plugs once and reset the ecu and the light was off for about a week. After that I reset the ecu and the cel comes on right away!

Also today i checked it with a scan tool. P1362, TDC no signal. I also noticed a wire that is free on my distributor? Could this be what should be connected to the ECU? Does the TDC signal come from the distributor on a 99? I was under the impression any car 96 and above had its own TDC sensor near the crank?


Modified by SupRlude01 at 2:34 AM 12/28/2007

TomsDC

i think its in the dizzy but im not 100% sure on that. the other one by the crank is a crank angle sensor not a tdc sensor. ill talk to a few friends of mine and let you know.

SupRlude01

According to my helms manual your right TomsDC. I did a lot of searches and everyone claims its not in the dizzy for a 99 but im gonna go with the helms. After i get a new dissy ill throw it in and let ya guys know if it works.