96 Integra - no spark
#1
Honda-Tech Member
Thread Starter
Join Date: Jan 2008
Location: Raleigh, NC, USA
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
96 Integra - no spark
Hi, I sure could use some help...I picked up a 96 Integra in which the timing belt was broken and I replace it and all the valves since many were bent. The guy I had picked the car up from already had the head out, but I believe I put everything back together OK along with new plugs.
Car cranks no problem but I can get any spark. I checked the coils according to the shop manual and troubleshooting flow charts and I have power to the distributor and just replaced the ignitor inside the distributor...still no spark.
I believe that the TDC sensor is built into the distrib, but don't really know how the spark gets generated. I imagine that the ECM is involved...so it's looking like it might be a bad ECM, but I'm not sure and don;t really want to put out the $$ if I don't have to.
Any ideas?
Thnaks in advance.
rjmiller
Car cranks no problem but I can get any spark. I checked the coils according to the shop manual and troubleshooting flow charts and I have power to the distributor and just replaced the ignitor inside the distributor...still no spark.
I believe that the TDC sensor is built into the distrib, but don't really know how the spark gets generated. I imagine that the ECM is involved...so it's looking like it might be a bad ECM, but I'm not sure and don;t really want to put out the $$ if I don't have to.
Any ideas?
Thnaks in advance.
rjmiller
Thread
Thread Starter
Forum
Replies
Last Post
Whatelseyouwant
Engine Management and Tuning
0
04-28-2017 03:06 PM
ipcpartsdirect
Tech / Misc
5
03-07-2013 04:11 PM