91 integra oil plug size
#1
Junior Member
Thread Starter
Join Date: Feb 2003
Location: CA
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
91 integra oil plug size
does anybody know the size of the oil drain plug for a 91 integra? the hole is stripped so i need to find the size so i can get an oversize plug.
i believe its 6x17mm?
i believe its 6x17mm?
#3
Re: 91 integra oil plug size (SilviaDriver)
Are you sure it's the pan that's stripped and not the bolt?
If you get an oversized one MAKE DAMN SURE you put the oversized one in straight. It's kind of hard to get it exactly straight because of the angle. I didn't get my oversized one in straight on my old Integra and the head of the new bolt didn't completely seal against the pan and I had a leak. I eventually had to JB Weld the hole and all this other crap because of it.
If you get an oversized one MAKE DAMN SURE you put the oversized one in straight. It's kind of hard to get it exactly straight because of the angle. I didn't get my oversized one in straight on my old Integra and the head of the new bolt didn't completely seal against the pan and I had a leak. I eventually had to JB Weld the hole and all this other crap because of it.
#4
Member
Join Date: Oct 2003
Location: WeHo, CA, USA
Posts: 1,912
Likes: 0
Received 0 Likes
on
0 Posts
Re: 91 integra oil plug size
It's actually a 14mm bolt, although the bolt's head needs a 17mm socket. You will notice that your crush washers are 14mm, corresponding with the actual threaded portion of the drain plug bolt.
And as Honda Hick said, be veeerrrrry careful.
And as Honda Hick said, be veeerrrrry careful.
Thread
Thread Starter
Forum
Replies
Last Post